This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACE100X175S, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.

The AirTAC ACP Compact Cylinder ACP100X175S is a double acting DIN-standard tight/compact air cylinder with a Ø100mm bore and 175mm stroke, 1/4" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE100X175S (ISO 21287 ACE), in the same bore, stroke and force class.
The ACP100X175S is a double acting compact cylinder in the DIN-standard ACP series, with a 100 mm bore, 175 mm stroke and a 25 mm hard-chrome S45C piston rod. Air drives the rod in both directions, and fixed TPU bumpers sit at each end. At 0.5 MPa it pushes with 3927 N and pulls with 3681.6 N; at 0.7 MPa those figures rise to 5497.8 N and 5154.2 N. The short ISO 21287-class body saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into heavy presses, clamping gantries and machine guards where a full-length body will not fit. The S in the code means the optional -S magnet is fitted, so CMSE or DMSE reed and solid-state switches can be mounted directly on the tube for end-of-stroke signalling.
As a sizing guide, plan on about 2356 N (roughly 240 kg of force) of usable work at 0.5 MPa instead of the full 3927 N rating, which leaves margin for friction and pressure drop. Note that this model is discontinued: the current-production direct is the ACE100X175, which keeps the same bore, stroke and force class, so confirm the ISO 21287 mounting dimensions before swapping. A plain cylinder of this type does not hold position when air is lost - the piston drifts - so add a rod lock or pilot check valve if the load must stay put.
| Model | Airtac ACP Compact Cylinder ACP100X175S |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE100X175S |
| Bore size | Ø100 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE100X175S (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | 5154 N |
| Max (@1.0 MPa) | 801 kgf | |
The ACE100X175S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 100 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
With about 240 kg of usable force at 0.5 MPa, the 100 mm bore clamps steel castings in milling and turning fixtures where smaller bores stall, and the 175 mm stroke clears part loading by hand.
The 3927 N push at 0.5 MPa (5497.8 N at 0.7 MPa) suits light press work such as bushing insertion in automotive sub-assemblies, with the short body fitting inside guarded press heads.
At 100 mm bore this is the top of the ACP range: 3927 N push at 0.5 MPa where an 80 mm bore delivers 2513.3 N and there is no larger standard bore. If your clamp force calculation lands near 2400 N of real work, this size fits; if you need under 2000 N, the 80 mm saves space and air. Stroke 175 mm sits inside the 300 mm maximum standard stroke for this bore, so it is a catalogue item rather than a made-to-order length. The female M16x1.5 rod thread and 1/4" PT ports suit standard I/Y knuckles and power clamps, and FA/FB flange, LB foot or CA/CB clevis mounts bolt to the same face family. Because the -S magnet is fitted here, CMSE / DMSE switches work out of the box. Order the ACE100X175 as the current replacement and verify ISO 21287 mounting dimensions first.
Replacement checklist
Push is 3927 N and pull 3681.6 N at 0.5 MPa; at 0.7 MPa push reaches 5497.8 N and pull 5154.2 N, with a theoretical maximum of 800.9 kgf at 1.0 MPa. It is a double acting compact cylinder, 100 mm bore, 175 mm stroke, 25 mm rod with female M16x1.5 thread, 1/4" PT ports, operating on 0.15-1.0 MPa (22-145 psi) filtered air, proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C, with fixed TPU bumpers at both ends. It is discontinued; the ACE100X175 is the current replacement.
Yes. The S in the model code means the optional -S magnet is fitted, so CMSE reed or DMSE solid-state switches clamp onto the tube to signal extend and retract positions. Without the -S code there is no magnet and no switching. For mounting, FA/FB flanges, LB feet and CA/CB clevises are available. Since this model is discontinued, order the ACE100X175 instead and confirm the ISO 21287 mounting dimensions before the swap.
Send us the quantity and destination. We confirm price, stock and lead time on the ACE100X175S replacement — usually within 7-8 hours.