This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACE100X200B, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACP Compact Cylinder ACP100X200B
The AirTAC ACP Compact Cylinder ACP100X200B is a double acting DIN-standard tight/compact air cylinder with a Ø100mm bore and 200mm stroke, 1/4" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE100X200B (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ100 mm
- Stroke200 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM16×1.5
- StatusDiscontinued → ACE100X200B
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACP Compact Cylinder ACP100X200B
The ACP100X200B is a double acting compact cylinder in the DIN-standard ACP series, with a 100 mm bore and 200 mm stroke driving a 25 mm S45C hard-chrome rod from a hard-anodized aluminium body. At 0.5 MPa it pushes 3927 N and pulls 3681.6 N; at 0.7 MPa push rises to 5497.8 N, with a theoretical peak of 800.9 kgf at 1.0 MPa. The B code gives a male rod thread on a PT port supply, and the 1/4" port matches the 100 mm bore. Its short ISO 21287-class body saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, so heavy clamping fits where a full-length body cannot.
FA/FB flange, LB foot, CA/CB clevis, CR, SDB and FTC brackets bolt straight to the ISO 21287 face. This model is discontinued: order the ACE100X200, the current direct in the same bore, stroke and force class, and confirm the ISO 21287 mounting dimensions before swapping. Note the fixed TPU bumper only decelerates at the ends - it never holds a load, so add a rod lock or pilot check valve where position must be kept.
Airtac ACP Compact Cylinder ACP100X200B Technical Specifications
| Model | Airtac ACP Compact Cylinder ACP100X200B |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE100X200B |
| Bore size | Ø100 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE100X200B (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | 5154 N |
| Max (@1.0 MPa) | 801 kgf | |
The ACE100X200B produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac ACP Compact Cylinder ACP100X200B
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 100 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACP Compact Cylinder ACP100X200B Is Used
Press frame clamping
With 3927 N push at 0.5 MPa and about 240 kgf of usable working force, the 100 mm bore holds steel press dies or aluminium casting fixtures closed through the full 200 mm stroke.
Pallet gate actuation
The short body, about 50% shorter in mounting length than an ISO 15552 profile cylinder, swings heavy pallet-line gates and stops in gantries too tight for a long-body cylinder.
Replacing the Airtac ACP Compact Cylinder ACP100X200B with the ACE100X200B
At this force class the 100 mm bore is near the top of the range: a 63 mm bore delivers 1558.6 N push at 0.5 MPa, while there is no larger standard bore above 100 mm in this family, so step to a wider ACE body or a higher pressure circuit if 3927 N is marginal. Stroke 200 mm sits inside the 300 mm maximum standard stroke for bore 100, so it is a catalogue item, not made to order. Choose the B male rod thread for knuckled or tooled ends, and remember the optional -S magnet is what enables CMSE / DMSE switches - without it no sensor can be fitted. Since ACP is discontinued, size the job on ACE100X200 and verify the ISO 21287 mounting dimensions.
Replacement checklist
- ✓ Current-production ACE → ACE100X200B
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACP Compact Cylinder ACP100X200B FAQ
At 0.5 MPa the double-acting cylinder pushes 3927 N and pulls 3681.6 N; at 0.7 MPa push is 5497.8 N and pull 5154.2 N; theoretical maximum is 800.9 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C, air filtered to 40 um, 1/4" PT ports, 25 mm male-thread rod (B code).
Order ACE100X200: swap the P for an E and you get the current-production ISO 21287 successor in the same 100 mm bore, 200 mm stroke and force class. The ACP is DIN-standard, so confirm the ISO 21287 mounting dimensions against your fixture before the swap. FA/FB flange, LB foot, CA/CB clevis, CR, SDB and FTC brackets plus I/Y rod knuckles are available on the ACE face, and the optional -S magnet enables CMSE / DMSE switches.
Related AirTAC ACE Cylinders
Request a Quote for the ACE100X200B
Send us the quantity and destination. We confirm price, stock and lead time on the ACE100X200B replacement — usually within 7-8 hours.