This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACE100X200S, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACP Compact Cylinder ACP100X200S
The AirTAC ACP Compact Cylinder ACP100X200S is a double acting DIN-standard tight/compact air cylinder with a Ø100mm bore and 200mm stroke, 1/4" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE100X200S (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ100 mm
- Stroke200 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM16×1.5
- StatusDiscontinued → ACE100X200S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACP Compact Cylinder ACP100X200S
The ACP100X200S is a double acting compact cylinder in the DIN-standard ACP series, with a 100 mm bore, 200 mm stroke and a 25 mm hard-chrome S45C rod on a hard-anodized aluminium body. At 0.5 MPa it pushes 3927 N and pulls 3681.6 N; at 0.7 MPa that rises to 5497.8 N push, with a theoretical ceiling of 800.9 kgf at 1.0 MPa. The S code means the optional -S magnet is fitted, so CMSE / DMSE reed or solid-state switches can be mounted directly on the body for end-of-stroke signalling. Air supply is filtered to 40 um, pressure runs 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, and a fixed TPU bumper sits at both ends.
Its short ISO 21287-class body saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, which is why this bore size fits heavy clamping stations and press gantries where a full-length body will not. Note that this model is discontinued: the current-production direct is ACE100X200, so confirm ISO 21287 mounting dimensions before swapping.
Airtac ACP Compact Cylinder ACP100X200S Technical Specifications
| Model | Airtac ACP Compact Cylinder ACP100X200S |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE100X200S |
| Bore size | Ø100 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE100X200S (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | 5154 N |
| Max (@1.0 MPa) | 801 kgf | |
The ACE100X200S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac ACP Compact Cylinder ACP100X200S
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 100 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACP Compact Cylinder ACP100X200S Is Used
Heavy fixture clamping
With 3927 N push at 0.5 MPa, the 100 mm bore clamps large castings or welded fabrications in machining fixtures, and the short body slots into tight fixture plates where a full-length profile cylinder cannot fit.
Press and forming stations
The 200 mm stroke and about 200 kg vertical-lift margin suit small stamping, riveting and marking heads on assembly lines, with CMSE / DMSE switches confirming both end positions via the fitted -S magnet.
Gate and stopper actuation
Conveyor gates, lifters and heavy stopper pins in bottling or palletizing lines use the 3681.6 N pull stroke for reliable retraction, with the M16x1.5 female rod thread taking standard knuckles.
Replacing the Airtac ACP Compact Cylinder ACP100X200S with the ACE100X200S
At 100 mm bore this is the top of the ACP range: 3927 N push at 0.5 MPa, where the next size down (80 mm bore) delivers 2513 N and no larger bore exists in the family. If your load needs less than about 240 kgf of working force, an 80 mm unit saves air and space. The 200 mm stroke sits well inside the 300 mm maximum standard stroke for this bore, so no made-to-order length is required. This unit carries the optional -S magnet for CMSE / DMSE switches; FA/FB flange, LB foot, CA/CB clevis and related brackets bolt to the same mounting face. Remember the piston drifts when air is lost - add a rod lock or pilot check valve if the load must stay put. Order ACE100X200 as the current replacement.
Replacement checklist
- ✓ Current-production ACE → ACE100X200S
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACP Compact Cylinder ACP100X200S FAQ
At 0.5 MPa it pushes 3927 N and pulls 3681.6 N; at 0.7 MPa push is 5497.8 N and pull 5154.2 N; theoretical maximum is 800.9 kgf at 1.0 MPa. It is a double acting compact cylinder, 100 mm bore, 200 mm stroke, 25 mm rod with M16x1.5 female thread, 1/4" PT ports, operating range 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C, fixed TPU bumpers at both ends. The model is discontinued; ACE100X200 is the current replacement.
The short-body build saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits dense machine frames and jigs. The S in ACP100X200S means the optional -S magnet is fitted, allowing CMSE reed or DMSE solid-state switches to sense end positions; without the -S code there is no magnet. Since the ACP is DIN-standard, verify ISO 21287 mounting dimensions of the ACE100X200 successor before ordering the swap.
Related AirTAC ACE Cylinders
Request a Quote for the ACE100X200S
Send us the quantity and destination. We confirm price, stock and lead time on the ACE100X200S replacement — usually within 7-8 hours.