verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote

This model is discontinued

AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACE100X275B, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.

AirTAC ACP Series · Discontinued Compact Cylinder

Airtac ACP Compact Cylinder ACP100X275B

The AirTAC ACP Compact Cylinder ACP100X275B is a double acting DIN-standard tight/compact air cylinder with a Ø100mm bore and 275mm stroke, 1/4" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE100X275B (ISO 21287 ACE), in the same bore, stroke and force class.

  • BoreØ100 mm
  • Stroke275 mm
  • Port size1/4"
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • StatusDiscontinued → ACE100X275B
$376.19 $405.27Save 7% Ships as ACE100X275B (current AirTAC replacement)
Ships as ACE100X275B, the current AirTAC replacement (the same code under the new prefix). Order this code as usual. Your cart, checkout and order confirmation will show the ACE100X275B we ship. View ACE100X275B
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every ACP100 stroke, mounting and version on one page All ACP100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac ACP Compact Cylinder ACP100X275B

A double acting DIN-standard compact cylinder, the ACP100X275B pairs a 100 mm bore with a 275 mm stroke and a 25 mm hard-chrome S45C rod on a male thread (B code). At 0.5 MPa it pushes 3927 N and pulls 3681.6 N; at 0.7 MPa those figures rise to 5497.8 N and 5154.2 N, with a theoretical peak of 800.9 kgf at 1.0 MPa. Air supply runs 0.15-1.0 MPa (22-145 psi) with 1.5 MPa (215 psi) proof pressure, and rod speed spans 30-500 mm/s.

The hard-anodized aluminium body with threaded aluminium covers keeps the mounting length roughly 50% shorter than an ISO 15552 profile cylinder, so this bore class fits inside press frames, guard doors and gantry beams that a full-length body cannot. As a working rule, plan on about 2356 N - roughly 240 kg of vertical lift - rather than the full 3927 N rating at 0.5 MPa. Note this model is discontinued: the current-production direct is ACE100X275, so confirm ISO 21287 mounting dimensions before ordering.

Airtac ACP Compact Cylinder ACP100X275B Technical Specifications

ModelAirtac ACP Compact Cylinder ACP100X275B
SeriesACP DIN compact cylinder (discontinued)
ReplacementACE100X275B
Bore sizeØ100 mm
Stroke275 mm
Acting typeDouble acting
Port size1/4"
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed bumper (both ends)
Max standard strokeUp to 300 mm

Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE100X275B (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.

Theoretical Output Force (Ø100mm)

PressurePush forcePull force
0.5 MPa3927 N3682 N
0.7 MPa5498 N5154 N
Max (@1.0 MPa)801 kgf

The ACE100X275B produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.

Model Code: Airtac ACP Compact Cylinder ACP100X275B

ACPDIN compact cylinder (double-acting, discontinued).
100Bore size in mm.
×275Stroke length in mm.
SOptional built-in magnet for sensor position sensing (omit for no magnet).
BRod type: B = male thread; blank = female thread.

Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).

Where the Airtac ACP Compact Cylinder ACP100X275B Is Used

factory

Press-frame clamping

The 3927 N push at 0.5 MPa clamps heavy weld fixtures inside a press frame, where the short ISO 21287 body saves about 50% of the length of an ISO 15552 profile cylinder.

forklift

Pallet-stacker ejector

With about 240 kg of practical vertical push at 0.5 MPa, the 275 mm stroke ejects stacked pallet loads from a warehouse conveyor lane on the 1/4" port supply.

Replacing the Airtac ACP Compact Cylinder ACP100X275B with the ACE100X275B

At this bore size the 100 mm ACP delivers 3927 N push at 0.5 MPa; if your load needs under about 2513 N, the 80 mm bore is the leaner choice, while nothing in the range exceeds 100 mm - step to a larger series for more force. The 275 mm stroke sits within the 300 mm maximum standard stroke for this bore, so no made-to-order build is required. Choose the male rod thread (B) for I/Y knuckles or custom tooling, and pick FA/FB flange, LB foot, CA/CB clevis, CR, SDB or FTC mounting to match the fixture. The optional -S magnet enables CMSE / DMSE switches; without it no magnet is fitted. For loads that must stay put when air drops, add a rod lock or pilot check valve. Order ACE100X275 as the current replacement and verify ISO 21287 dimensions.

Replacement checklist

  • ✓ Current-production ACE → ACE100X275B
  • ✓ Same bore / stroke / force class
  • ✓ Confirm ISO 21287 mounting dimensions
  • ✓ Port/thread type (PT / G)
  • ✓ Add -S for magnet if you need sensors
View ACE100X275B

Airtac ACP Compact Cylinder ACP100X275B FAQ

Push is 3927 N and pull 3681.6 N at 0.5 MPa; at 0.7 MPa push is 5497.8 N and pull 5154.2 N, with a theoretical maximum of 800.9 kgf at 1.0 MPa. It is double acting, runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), tolerates 1.5 MPa (215 psi) proof pressure, works from -20 to +70 C, and travels at 30-500 mm/s. The 1/4" port serves the 100 mm bore, and the fixed TPU bumpers at both ends simply soften end-of-stroke contact.

Order ACE100X275: swap the P for an E and you get the current-production ISO 21287 compact cylinder in the same 100 mm bore, 275 mm stroke and force class. Because the ACP was built to a DIN standard, confirm the ISO 21287 mounting dimensions and port pattern against your fixture before swapping. The ACE keeps the same mounting family (FA/FB flange, LB foot, CA/CB clevis, CR, SDB, FTC), and the optional -S magnet code still enables CMSE / DMSE position switches.

Related AirTAC ACE Cylinders

Request a Quote for the ACE100X275B

Send us the quantity and destination. We confirm price, stock and lead time on the ACE100X275B replacement — usually within 7-8 hours.

Thank you. We received your request for ACP100X275B and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.