This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACE100X350, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACP Compact Cylinder ACP100X350
The AirTAC ACP Compact Cylinder ACP100X350 is a double acting DIN-standard tight/compact air cylinder with a Ø100mm bore and 350mm stroke, 1/4" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE100X350 (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ100 mm
- Stroke350 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM16×1.5
- StatusDiscontinued → ACE100X350
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACP Compact Cylinder ACP100X350
A double acting compact cylinder built to the DIN-standard short-body format, the ACP100X350 pairs a 100 mm bore with a 350 mm stroke and delivers 3927 N of push force and 3681.6 N of pull force at 0.5 MPa, rising to 5497.8 N at 0.7 MPa. Its hard-anodized aluminium body with an S45C hard-chrome rod saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it suits long-stroke gantries and press fixtures where a full-length body would not fit. The 350 mm stroke is longer than the 300 mm standard limit for this bore, so it is a made-to-order build.
Note this model ships without a magnet: the optional -S code adds one so CMSE or DMSE switches can be fitted. The ACP100X350 is discontinued; the current-production replacement is the ACE100X350, and you should confirm ISO 21287 mounting dimensions before swapping.
Airtac ACP Compact Cylinder ACP100X350 Technical Specifications
| Model | Airtac ACP Compact Cylinder ACP100X350 |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE100X350 |
| Bore size | Ø100 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE100X350 (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | 5154 N |
| Max (@1.0 MPa) | 801 kgf | |
The ACE100X350 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac ACP Compact Cylinder ACP100X350
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 100 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACP Compact Cylinder ACP100X350 Is Used
Long-stroke press fixture
The 3927 N push at 0.5 MPa clamps or ejects steel stampings in a 350 mm-stroke die station where a full-length body would overhang the frame.
Gantry pusher on packaging line
The short body fits inside a tight gantry guard while the 350 mm stroke pushes cartons across a wide conveyor lane at 30-500 mm/s.
Replacing the Airtac ACP Compact Cylinder ACP100X350 with the ACE100X350
At 100 mm bore this is the top of the ACP range, so there is no larger step up - if 3927 N at 0.5 MPa is marginal for your load, move to a larger-bore ACE or add a pressure booster. A 63 mm bore gives 1558.6 N at 0.5 MPa if the 3927 N figure is overkill. Remember a plain cylinder drifts when air is lost, so specify a rod lock or pilot check valve for held loads. Foot (LB), flange (FA/FB) and clevis (CA/CB) mountings are available, and the optional -S magnet enables CMSE / DMSE switches. Order the ACE100X350 as the current direct and verify ISO 21287 mounting dimensions.
Replacement checklist
- ✓ Current-production ACE → ACE100X350
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACP Compact Cylinder ACP100X350 FAQ
Push 3927 N and pull 3681.6 N at 0.5 MPa; push 5497.8 N and pull 5154.2 N at 0.7 MPa; theoretical maximum 800.9 kgf at 1.0 MPa. It is a 100 mm bore, 350 mm stroke double acting cylinder with a 25 mm rod, M16x1.5 female rod thread, 1/4" PT ports, operating pressure 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s and a temperature range of -20 to +70 C. The 350 mm stroke exceeds the 300 mm standard limit for this bore, so it is made to order.
Order the ACE100X350, the current-production ISO 21287 successor: swap the P for an E and you get the same 100 mm bore, 350 mm stroke and force class in a matching short body. Because the ACP was DIN-standard, confirm the ISO 21287 mounting dimensions before swapping. If you need the optional -S magnet for CMSE / DMSE switches, order it on the ACE code as well.
Related AirTAC ACE Cylinders
Request a Quote for the ACE100X350
Send us the quantity and destination. We confirm price, stock and lead time on the ACE100X350 replacement — usually within 7-8 hours.