This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACE100X350S, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACP Compact Cylinder ACP100X350S
The AirTAC ACP Compact Cylinder ACP100X350S is a double acting DIN-standard tight/compact air cylinder with a Ø100mm bore and 350mm stroke, 1/4" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE100X350S (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ100 mm
- Stroke350 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM16×1.5
- StatusDiscontinued → ACE100X350S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACP Compact Cylinder ACP100X350S
The ACP100X350S is a double acting DIN-standard compact cylinder with a 100 mm bore and a made-to-order 350 mm stroke, delivering 3927 N push and 3681.6 N pull at 0.5 MPa (5497.8 N push at 0.7 MPa). Its hard-anodized aluminium body with an S45C hard-chrome rod saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into long-stroke gantries and press fixtures where a full-length body would not fit. The -S code on this model means the magnet is fitted, so CMSE or DMSE reed and solid-state switches can be mounted directly on the body.
This model is discontinued; the current-production replacement is the ACE100X350, which matches the same bore, stroke and force class in the ISO 21287 family - confirm the ISO 21287 mounting dimensions before swapping. A fixed TPU bumper sits at both ends, ports are 1/4", the rod thread is female M16x1.5, and speed runs 30-500 mm/s across 0.15-1.0 MPa (22-145 psi).
Airtac ACP Compact Cylinder ACP100X350S Technical Specifications
| Model | Airtac ACP Compact Cylinder ACP100X350S |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE100X350S |
| Bore size | Ø100 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE100X350S (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | 5154 N |
| Max (@1.0 MPa) | 801 kgf | |
The ACE100X350S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac ACP Compact Cylinder ACP100X350S
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 100 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACP Compact Cylinder ACP100X350S Is Used
Long-stroke press fixture
The 3927 N push at 0.5 MPa (about 2356 N for real work) suits clamping steel weldments in a fabrication-cell press jig where the short body must fit behind the tooling.
Position-monitored gate actuator
The fitted -S magnet accepts CMSE or DMSE switches, so a 350 mm machine-guard gate can report open and closed positions to the PLC without external proximity sensors.
Replacing the Airtac ACP Compact Cylinder ACP100X350S with the ACE100X350S
Size up or down by force: a 63 mm bore gives 1558.6 N push at 0.5 MPa, while this 100 mm bore reaches 3927 N push and 3681.6 N pull - step up only if you exceed the 2356 N working figure. Note the 350 mm stroke exceeds the 300 mm standard maximum for bore 100, so it is a made-to-order build with a longer lead time. A plain cylinder drifts when air is lost, so add a rod lock or pilot check valve if the load must stay put. Choose FA/FB flange, LB foot or CA/CB clevis mounting to match the ISO 21287 face, and remember the magnet here comes from the -S code, not as default equipment. Order the ACE100X350 as the current direct successor.
Replacement checklist
- ✓ Current-production ACE → ACE100X350S
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACP Compact Cylinder ACP100X350S FAQ
At 0.5 MPa it pushes 3927 N and pulls 3681.6 N; at 0.7 MPa those rise to 5497.8 N push and 5154.2 N pull, with a theoretical maximum of 800.9 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, and the 350 mm stroke is a made-to-order length above the 300 mm standard maximum for this bore.
No - the ACP family is discontinued. Order the ACE100X350, the current-production ISO 21287 successor with the same 100 mm bore, 350 mm stroke and force class. Because the ACP was built to a DIN standard, confirm the ISO 21287 mounting dimensions and your chosen FA/FB, LB or CA/CB bracket before swapping. The magnet on this unit came from the optional -S code; specify it again on the ACE if you need CMSE or DMSE switching.
Related AirTAC ACE Cylinders
Request a Quote for the ACE100X350S
Send us the quantity and destination. We confirm price, stock and lead time on the ACE100X350S replacement — usually within 7-8 hours.