This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACE100X350SB, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.

The AirTAC ACP Compact Cylinder ACP100X350SB is a double acting DIN-standard tight/compact air cylinder with a Ø100mm bore and 350mm stroke, 1/4" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE100X350SB (ISO 21287 ACE), in the same bore, stroke and force class.
A double acting compact cylinder in the DIN-standard ACP series, the ACP100X350SB pairs a 100 mm bore with a 350 mm stroke and a 25 mm hard-chrome S45C rod on a male thread (B code). At 0.5 MPa it pushes 3927 N and pulls 3681.6 N; at 0.7 MPa those rise to 5497.8 N and 5154.2 N, with a theoretical ceiling of 800.9 kgf at 1.0 MPa. The 350 mm stroke exceeds the 300 mm standard limit for this bore, so it is a made-to-order build. This model is discontinued - the current-production replacement is the ISO 21287 ACE100X350, so confirm mounting dimensions before swapping.
The hard-anodized aluminium body with threaded aluminium covers runs on 0.15-1.0 MPa (22-145 psi) filtered air at 30-500 mm/s, with fixed TPU bumpers at both ends. Its short ISO 21287-class body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which matters in long-stroke gantries and press frames. Because the S code is present, the optional -S magnet is fitted, so CMSE or DMSE switches can be mounted for end-position sensing.
| Model | Airtac ACP Compact Cylinder ACP100X350SB |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE100X350SB |
| Bore size | Ø100 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE100X350SB (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | 5154 N |
| Max (@1.0 MPa) | 801 kgf | |
The ACE100X350SB produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 100 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
The 3927 N push at 0.5 MPa (about 800.9 kgf theoretical) suits a 350 mm-stroke stamping or riveting head on a light assembly press, with the male rod thread taking a custom tooling adapter.
A 350 mm made-to-order stroke swings heavy machine guards or sliding gates on a food packaging line, where the short body saves roughly half the mounting length of an ISO 15552 profile cylinder.
At this bore size the ACP100X350SB sits near the top of the range: the 80 mm bore delivers 2513.3 N push at 0.5 MPa, while the 100 mm bore here gives 3927 N - step down to 80 mm if your load is under about 250 kgf. Remember that a plain cylinder of this type drifts when air is lost, so add a rod lock or pilot check valve for held loads. The 1/4" port, PT thread and male rod thread (B) are fixed by the code; FA/FB flange, LB foot or CA/CB clevis mounting can be specified. Since this model is discontinued, order the ACE100X350 as the direct successor and verify the ISO 21287 mounting footprint first.
Replacement checklist
At 0.5 MPa it pushes 3927 N and pulls 3681.6 N; at 0.7 MPa push is 5497.8 N and pull 5154.2 N; theoretical maximum force is 800.9 kgf at 1.0 MPa. It is double acting, runs 30-500 mm/s on 0.15-1.0 MPa (22-145 psi) air, and the 350 mm stroke is a non-standard build above the 300 mm standard limit for this bore.
No - the ACP family is discontinued. The current-production direct is the ACE100X350 (swap the P for an E), an ISO 21287 compact cylinder in the same bore, stroke and force class with matching FA/FB, LB and CA/CB mounting options. Because the ACP was DIN-standard, confirm the ISO 21287 mounting dimensions before you swap. The -S magnet on this code carries over as an option for CMSE / DMSE switches.
Send us the quantity and destination. We confirm price, stock and lead time on the ACE100X350SB replacement — usually within 7-8 hours.