This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACE100X35S, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACP Compact Cylinder ACP100X35S
The AirTAC ACP Compact Cylinder ACP100X35S is a double acting DIN-standard tight/compact air cylinder with a Ø100mm bore and 35mm stroke, 1/4" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE100X35S (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ100 mm
- Stroke35 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM16×1.5
- StatusDiscontinued → ACE100X35S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACP Compact Cylinder ACP100X35S
A double acting DIN-standard compact cylinder, the ACP100X35S pairs a 100 mm bore with a short 35 mm stroke and comes with the optional -S magnet already fitted, so CMSE or DMSE reed and solid-state switches can be mounted directly on the body. At 0.5 MPa it pushes 3927 N and pulls 3681.6 N; at 0.7 MPa that rises to 5497.8 N. The hard-anodized aluminium body carries a 25 mm S45C hard-chrome rod with a female M16x1.5 thread, and air supply runs 0.15-1.0 MPa (22-145 psi).
The short ISO 21287-class body saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, which is why this bore size is popular in heavy clamping fixtures and press gantries with tight envelopes. Note that this model is discontinued: the current-production direct is ACE100X35, so confirm ISO 21287 mounting dimensions before swapping.
Airtac ACP Compact Cylinder ACP100X35S Technical Specifications
| Model | Airtac ACP Compact Cylinder ACP100X35S |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE100X35S |
| Bore size | Ø100 mm |
| Stroke | 35 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE100X35S (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | 5154 N |
| Max (@1.0 MPa) | 801 kgf | |
The ACE100X35S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac ACP Compact Cylinder ACP100X35S
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 100 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACP Compact Cylinder ACP100X35S Is Used
Press-frame clamping
The 3927 N push at 0.5 MPa and 35 mm stroke suit short-travel clamping of steel castings on a machining press, where the compact body fits between the platens.
Weld fixture hold-downs
The -S magnet with CMSE or DMSE switches confirms clamp state on automotive weld fixtures, and the flange or foot mounts drop into standard fixture plates.
Replacing the Airtac ACP Compact Cylinder ACP100X35S with the ACE100X35S
At 100 mm bore this is the top of the ACP range: 3927 N push at 0.5 MPa versus 2513 N for the 80 mm bore, while the 63 mm bore tops out at 1558.6 N. If your load needs less than about 2500 N of working force, the 80 mm bore saves space and air; if you need the full 800.9 kgf theoretical class, stay at 100 mm. The 35 mm stroke sits well inside the 300 mm maximum standard stroke for this bore. FA/FB flange, LB foot and CA/CB clevis mounts bolt to the same face, and remember the piston drifts when air is lost, so add a rod lock or pilot check valve for held loads. Order ACE100X35 as the current replacement.
Replacement checklist
- ✓ Current-production ACE → ACE100X35S
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACP Compact Cylinder ACP100X35S FAQ
At 0.5 MPa it delivers 3927 N push and 3681.6 N pull; at 0.7 MPa, 5497.8 N push and 5154.2 N pull. Theoretical maximum force is 800.9 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, with a fixed TPU bumper at both ends.
No, the ACP family is discontinued. The current-production direct is ACE100X35, which keeps the same 100 mm bore, 35 mm stroke and force class in an ISO 21287 short body. Because the ACP was DIN-standard, confirm the ISO 21287 mounting dimensions before swapping. This unit already carries the optional -S magnet for CMSE / DMSE switches, and the 1/4" port and female M16x1.5 rod thread carry over.
Related AirTAC ACE Cylinders
Request a Quote for the ACE100X35S
Send us the quantity and destination. We confirm price, stock and lead time on the ACE100X35S replacement — usually within 7-8 hours.