This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACE100X35SB, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACP Compact Cylinder ACP100X35SB
The AirTAC ACP Compact Cylinder ACP100X35SB is a double acting DIN-standard tight/compact air cylinder with a Ø100mm bore and 35mm stroke, 1/4" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE100X35SB (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ100 mm
- Stroke35 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM16×1.5
- StatusDiscontinued → ACE100X35SB
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACP Compact Cylinder ACP100X35SB
The ACP100X35SB is a double acting compact cylinder in the discontinued AirTAC ACP DIN-standard series, with a 100 mm bore, 35 mm stroke and a 25 mm hard-chrome S45C piston rod carrying a male thread (B code). At 0.5 MPa it pushes 3927 N and pulls 3681.6 N; at 0.7 MPa those rise to 5497.8 N and 5154.2 N, with a theoretical maximum of 800.9 kgf at 1.0 MPa. Its short ISO 21287-class body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it fits press fixtures and guarding where a full-length body cannot.
The 1/4" port, fixed TPU bumpers at both ends and hard-anodized aluminium body are shared across the series, and the S in this code means the optional -S magnet is fitted, so CMSE or DMSE reed and solid-state switches can be mounted directly. This model is discontinued: the current-production direct is ACE100X35, and you should confirm the ISO 21287 mounting dimensions before swapping, since the ACP follows the DIN standard.
Airtac ACP Compact Cylinder ACP100X35SB Technical Specifications
| Model | Airtac ACP Compact Cylinder ACP100X35SB |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE100X35SB |
| Bore size | Ø100 mm |
| Stroke | 35 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE100X35SB (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | 5154 N |
| Max (@1.0 MPa) | 801 kgf | |
The ACE100X35SB produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac ACP Compact Cylinder ACP100X35SB
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 100 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACP Compact Cylinder ACP100X35SB Is Used
Pneumatic press fixture
With 3927 N push at 0.5 MPa (about 5497.8 N at 0.7 MPa), the 100 mm bore drives short-stake or marking presses on aluminium brackets where the 35 mm stroke is all the travel the tool needs.
Clamping on machining centres
The short body saves about 50% of the length of an ISO 15552 profile cylinder, letting the ACP100X35SB clamp turbine housings or gear blanks inside tight fixture pockets on CNC pallets.
Replacing the Airtac ACP Compact Cylinder ACP100X35SB with the ACE100X35SB
At 100 mm bore this is the top of the ACP range: 3927 N push at 0.5 MPa versus 2513.3 N for an 80 mm bore, so step down to 80 mm if your load is under about 1500 N of working force. Strokes up to 300 mm are standard for this bore, so 35 mm is a stock configuration. The male rod thread (B) suits rod knuckles and threaded tooling, while FA/FB flange, LB foot and CA/CB clevis mounts bolt to the same face family. Note that a plain ACP does not hold position when air is lost - add a rod lock or pilot check valve for a held load. Order the ACE100X35 as the current replacement and verify ISO 21287 dimensions.
Replacement checklist
- ✓ Current-production ACE → ACE100X35SB
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACP Compact Cylinder ACP100X35SB FAQ
At 0.5 MPa it delivers 3927 N push and 3681.6 N pull; at 0.7 MPa, 5497.8 N push and 5154.2 N pull. The theoretical maximum is 800.9 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi) with 1.5 MPa (215 psi) proof pressure, speed 30-500 mm/s, and a fixed TPU bumper at each end.
Order the ACE100X35, the current-production ISO 21287 successor: swap the P for an E and you get the same 100 mm bore, 35 mm stroke and force class in a matching short body. Confirm the ISO 21287 mounting dimensions before swapping, because the ACP was built to the DIN standard. The S in your code means the optional -S magnet is fitted, so CMSE or DMSE reed and solid-state switches can be clamped to the body for end-of-stroke signalling.
Related AirTAC ACE Cylinders
Request a Quote for the ACE100X35SB
Send us the quantity and destination. We confirm price, stock and lead time on the ACE100X35SB replacement — usually within 7-8 hours.