This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACE100X375B, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.

The AirTAC ACP Compact Cylinder ACP100X375B is a double acting DIN-standard tight/compact air cylinder with a Ø100mm bore and 375mm stroke, 1/4" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE100X375B (ISO 21287 ACE), in the same bore, stroke and force class.
The ACP100X375B is a double acting DIN-standard compact cylinder with a 100 mm bore and a made-to-order 375 mm stroke, driving a 25 mm hard-chrome S45C rod from a hard-anodized aluminium body. At 0.5 MPa it pushes 3927 N and pulls 3681.6 N; at 0.7 MPa push rises to 5497.8 N, with a theoretical ceiling of 800.9 kgf at 1.0 MPa. The short ISO 21287-class body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into deep-stroke presses and gantries where a full-length body will not fit.
The 375 mm stroke exceeds the 300 mm standard limit for bore 100, so it is built to order. This model is discontinued; the current-production direct is ACE100X375, so confirm ISO 21287 mounting dimensions before swapping. The male rod thread (B code) and PT ports are standard here, while the magnet is only fitted when you order the optional -S code.
| Model | Airtac ACP Compact Cylinder ACP100X375B |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE100X375B |
| Bore size | Ø100 mm |
| Stroke | 375 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE100X375B (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | 5154 N |
| Max (@1.0 MPa) | 801 kgf | |
The ACE100X375B produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 100 | Bore size in mm. |
| ×375 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
The 375 mm made-to-order stroke and 3927 N push at 0.5 MPa let a compact body reach deep into a sheet-metal stamping fixture that a full-length cylinder cannot enter.
The long 375 mm stroke sweeps rejected containers off a high-speed filling conveyor at 30-500 mm/s, with the fixed TPU bumper softening each end of travel.
Size both ways: bore 80 delivers 2513.3 N push at 0.5 MPa for lighter clamping, while this 100 mm bore gives 3927 N push and 3681.6 N pull at the same pressure. Remember that a plain ACP drifts when air is lost, so add a rod lock or pilot check valve if the load must stay put. FA/FB flange, LB foot and CA/CB clevis mountings bolt to the standard face, and CMSE or DMSE switches work only with the optional -S magnet. Order ACE100X375 instead, since ACP100X375B is discontinued.
Replacement checklist
At 0.5 MPa the cylinder pushes 3927 N and pulls 3681.6 N; at 0.7 MPa push reaches 5497.8 N and pull 5154.2 N. The theoretical maximum is 800.9 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi) with 1.5 MPa (215 psi) proof pressure, speed 30-500 mm/s, and the 375 mm stroke is a non-standard, made-to-order length above the 300 mm standard limit for bore 100.
No - ACP100X375B is discontinued. The current-production replacement is ACE100X375, which keeps the same 100 mm bore, 375 mm stroke class and short-body format; confirm the ISO 21287 mounting dimensions before swapping. Mounting options include FA/FB flange, LB foot and CA/CB clevis, the rod end is male-threaded (B code), ports are 1/4" PT, and position sensing via CMSE or DMSE switches requires ordering the optional -S magnet code.
Send us the quantity and destination. We confirm price, stock and lead time on the ACE100X375B replacement — usually within 7-8 hours.