This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACE100X55SB, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.

The AirTAC ACP Compact Cylinder ACP100X55SB is a double acting DIN-standard tight/compact air cylinder with a Ø100mm bore and 55mm stroke, 1/4" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE100X55SB (ISO 21287 ACE), in the same bore, stroke and force class.
The ACP100X55SB is a double acting DIN-standard compact cylinder with a 100 mm bore and 55 mm stroke, driving a 25 mm hard-chrome S45C rod through a male thread (the B code). At 0.5 MPa it pushes 3927 N and pulls 3681.6 N; at 0.7 MPa those rise to 5497.8 N and 5154.2 N, with a theoretical ceiling of 800.9 kgf at 1.0 MPa. The short ISO 21287-class body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into heavy presses and gantries where a full-length body will not fit. Air supply is 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, and the 1/4" port matches this bore.
This model carries the optional -S magnet, so CMSE or DMSE reed and solid-state switches can be clamped directly to the hard-anodized aluminium body for end-of-stroke signals. The fixed TPU bumper at each end only softens deceleration - it never holds a load, so add a rod lock or pilot check valve if the 55 mm position must survive a lost air supply. Plan on roughly 2356 N of real work at 0.5 MPa (about 60% of the rated push), which is around 240 kg of usable thrust. Note that the ACP family is discontinued: the current-production direct is the ACE100X55, and buyers should confirm the ISO 21287 mounting dimensions before swapping.
| Model | Airtac ACP Compact Cylinder ACP100X55SB |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE100X55SB |
| Bore size | Ø100 mm |
| Stroke | 55 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE100X55SB (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | 5154 N |
| Max (@1.0 MPa) | 801 kgf | |
The ACE100X55SB produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 100 | Bore size in mm. |
| ×55 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
A 100 mm bore delivering 3927 N at 0.5 MPa suits a bench-top stamping or riveting head on light-gauge brackets, with the 55 mm stroke covering a short working cycle.
In a warehouse palletizer, the short body clamps cartons on a conveyor stopper station, and the -S magnet feeds a DMSE switch to confirm clamp closure each cycle.
On a bottling line, the compact 100 mm body slides a heavy guard door the final 55 mm, fitting inside the guard frame where a full-length profile cylinder cannot.
Size against neighbours: a 80 mm bore gives 2513.3 N push at 0.5 MPa, while stepping up is impossible past 100 mm - this is the largest bore in the family, so if 3927 N is marginal, move to a larger series. The 55 mm stroke sits well inside the 300 mm maximum standard stroke for this bore, so it is a catalogue item, not a made-to-order build. FA/FB flange, LB foot and CA/CB clevis mounts plus I/Y rod knuckles bolt to the same face, and the male rod thread (B) suits external nuts and knuckle joints. Because a plain cylinder drifts when air is lost, pair it with a rod lock for held loads. Order the ACE100X55 as the current replacement and verify the ISO 21287 footprint first.
Replacement checklist
Push is 3927 N and pull 3681.6 N at 0.5 MPa; at 0.7 MPa push reaches 5497.8 N and pull 5154.2 N, with a theoretical maximum of 800.9 kgf at 1.0 MPa. It is double acting, runs on 0.15-1.0 MPa (22-145 psi) air filtered to 40 um, operates from -20 to +70 C at 30-500 mm/s, uses a 1/4" port, and has a 25 mm male-thread rod. The model is discontinued; the ACE100X55 is the current direct.
The short ISO 21287-class body cuts mounting length by about 50% versus an ISO 15552 profile cylinder, so it fits tight fixtures. This unit carries the optional -S magnet, letting CMSE or DMSE switches sense both end positions on the aluminium body. The fixed TPU bumpers only decelerate the piston - for holding a load against air loss, add a rod lock or pilot check valve.
Send us the quantity and destination. We confirm price, stock and lead time on the ACE100X55SB replacement — usually within 7-8 hours.