This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACE100X75S, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACP Compact Cylinder ACP100X75S
The AirTAC ACP Compact Cylinder ACP100X75S is a double acting DIN-standard tight/compact air cylinder with a Ø100mm bore and 75mm stroke, 1/4" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE100X75S (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ100 mm
- Stroke75 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM16×1.5
- StatusDiscontinued → ACE100X75S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACP Compact Cylinder ACP100X75S
The ACP100X75S is a double acting compact cylinder in the DIN-standard ACP series, with a 100 mm bore and a 75 mm stroke. At 0.5 MPa it pushes with 3927 N and pulls with 3681.6 N; at 0.7 MPa those rise to 5497.8 N and 5154.2 N, with a theoretical peak of 800.9 kgf at 1.0 MPa. The S code means the optional -S magnet is fitted, so CMSE or DMSE reed and solid-state switches can be mounted directly on the body for end-of-stroke detection.
Its hard-anodized aluminium body with an S45C hard-chrome rod saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into short bays on presses, clamping fixtures and gantries. Note this model is discontinued: the current-production direct is the ACE100X75, so confirm ISO 21287 mounting dimensions before swapping.
Airtac ACP Compact Cylinder ACP100X75S Technical Specifications
| Model | Airtac ACP Compact Cylinder ACP100X75S |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE100X75S |
| Bore size | Ø100 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE100X75S (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | 5154 N |
| Max (@1.0 MPa) | 801 kgf | |
The ACE100X75S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac ACP Compact Cylinder ACP100X75S
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 100 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACP Compact Cylinder ACP100X75S Is Used
Press frame short-stroke clamping
A 75 mm stroke with 3927 N push at 0.5 MPa suits a compact stamping or crimping head on an electronics assembly line, where the short body fits inside the press guard.
Positioned slide on a machine tool fixture
The fitted -S magnet plus CMSE / DMSE switches gives end-of-stroke signals to the PLC for a machining fixture that indexes a 240 kg-class workholding load.
Replacing the Airtac ACP Compact Cylinder ACP100X75S with the ACE100X75S
At this force level, compare both directions: a 63 mm bore gives 1558.6 N push at 0.5 MPa, while the 100 mm bore here delivers 3927 N push and 3681.6 N pull - step up only if your fixture truly needs that margin. The 75 mm stroke sits well inside the 300 mm maximum standard stroke for this bore, so it is a catalogue item, not a made-to-order build. Remember that a plain cylinder drifts when air is lost; add a rod lock or pilot check valve if the load must stay put. FA/FB flange, LB foot and CA/CB clevis mounts bolt to the same face, and since the -S magnet is fitted on this unit, CMSE / DMSE switches work out of the box. For new projects, order the ACE100X75 instead - this ACP model is discontinued.
Replacement checklist
- ✓ Current-production ACE → ACE100X75S
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACP Compact Cylinder ACP100X75S FAQ
At 0.5 MPa it pushes 3927 N and pulls 3681.6 N; at 0.7 MPa, 5497.8 N push and 5154.2 N pull. The theoretical maximum is 800.9 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi) with 1.5 MPa (215 psi) proof pressure, speed 30-500 mm/s, and the 1/4" port matches the 100 mm bore. For real work, budget about 2356 N (roughly 240 kg) rather than the full rating.
The hard-anodized aluminium body is an ISO 21287-class short build, saving about 50% of the mounting length of an ISO 15552 profile cylinder, with FA/FB flange, LB foot and CA/CB clevis options and an M16x1.5 female rod thread. The S in the model code means the optional -S magnet is fitted, so CMSE / DMSE switches mount directly. The ACP family is discontinued - the ACE100X75 is the current direct, so verify ISO 21287 mounting dimensions before ordering.
Related AirTAC ACE Cylinders
Request a Quote for the ACE100X75S
Send us the quantity and destination. We confirm price, stock and lead time on the ACE100X75S replacement — usually within 7-8 hours.