This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACE100X80, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACP Compact Cylinder ACP100X80
The AirTAC ACP Compact Cylinder ACP100X80 is a double acting DIN-standard tight/compact air cylinder with a Ø100mm bore and 80mm stroke, 1/4" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE100X80 (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ100 mm
- Stroke80 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM16×1.5
- StatusDiscontinued → ACE100X80
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACP Compact Cylinder ACP100X80
The ACP100X80 is a double acting compact cylinder with a 100 mm bore and 80 mm stroke, built on a hard-anodized aluminium body with a 25 mm S45C hard-chrome rod and a fixed TPU bumper at each end. At 0.5 MPa it pushes 3927 N and pulls 3681.6 N; at 0.7 MPa push rises to 5497.8 N, with a theoretical peak of 800.9 kgf at 1.0 MPa. Its short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it was chosen for heavy presses and gantries where a full-length body would not fit.
This model is discontinued. The current-production replacement is the ACE100X80 (swap the P for an E), an ISO 21287 direct in the same bore, stroke and force class - confirm the ISO 21287 mounting dimensions before swapping, since the ACP followed the DIN standard. Note that no magnet is fitted on this code: the optional -S magnet must be ordered for CMSE / DMSE switch sensing. A plain unit also drifts when air is lost, so use a rod lock or pilot check valve to hold a load.
Airtac ACP Compact Cylinder ACP100X80 Technical Specifications
| Model | Airtac ACP Compact Cylinder ACP100X80 |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE100X80 |
| Bore size | Ø100 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE100X80 (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | 5154 N |
| Max (@1.0 MPa) | 801 kgf | |
The ACE100X80 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac ACP Compact Cylinder ACP100X80
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 100 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACP Compact Cylinder ACP100X80 Is Used
Pallet strapping press
With 3927 N push at 0.5 MPa (about 2356 N of usable work force), the 100 mm bore clinches strapping buckles on palletized cartons at packaging-line speed, cycling 30-500 mm/s between fixed TPU bumpers.
Billet ejector on a forging line
The 80 mm stroke punches finished billets out of a die pocket; the short body tucks under the hammer frame where an ISO 15552 profile cylinder would be roughly twice as long.
Replacing the Airtac ACP Compact Cylinder ACP100X80 with the ACE100X80
Size against neighbours: the 80 mm bore delivers 2513.3 N push at 0.5 MPa, while stepping up is not possible within the family - 100 mm is the largest ACP bore, so if 3927 N at 0.5 MPa is marginal, move to a larger ACE bore or raise pressure toward the 1.0 MPa (145 psi) limit. The 80 mm stroke sits well inside the 300 mm maximum standard stroke for this bore, so it is a catalog item, not a made-to-order build. FA/FB flange, LB foot and CA/CB clevis mountings plus the optional -S magnet for CMSE / DMSE switches let you match existing fixtures. Order ACE100X80 as the current direct and verify ISO 21287 mounting dimensions.
Replacement checklist
- ✓ Current-production ACE → ACE100X80
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACP Compact Cylinder ACP100X80 FAQ
At 0.5 MPa it pushes 3927 N and pulls 3681.6 N; at 0.7 MPa push is 5497.8 N and pull 5154.2 N; theoretical maximum is 800.9 kgf at 1.0 MPa. It is a double acting compact cylinder, 100 mm bore, 80 mm stroke, 25 mm rod with female M16x1.5 thread, 1/4" PT ports, operating on 0.15-1.0 MPa (22-145 psi) of air filtered to 40 um, at 30-500 mm/s and -20 to +70 C, with a fixed TPU bumper at both ends.
Order the ACE100X80, the ISO 21287 successor: swap the P for an E and you get the same bore, stroke and force class in a current-production short body. Before swapping, confirm the ISO 21287 mounting dimensions against your fixture, because the ACP was built to the DIN standard. If you need position sensing, remember the magnet is the optional -S code (for CMSE / DMSE switches), not a standard fitting.
Related AirTAC ACE Cylinders
Request a Quote for the ACE100X80
Send us the quantity and destination. We confirm price, stock and lead time on the ACE100X80 replacement — usually within 7-8 hours.