This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACE100X80B, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACP Compact Cylinder ACP100X80B
The AirTAC ACP Compact Cylinder ACP100X80B is a double acting DIN-standard tight/compact air cylinder with a Ø100mm bore and 80mm stroke, 1/4" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE100X80B (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ100 mm
- Stroke80 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM16×1.5
- StatusDiscontinued → ACE100X80B
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACP Compact Cylinder ACP100X80B
A double acting compact cylinder with a 100 mm bore and 80 mm stroke, the ACP100X80B pushes with 3927 N and pulls with 3681.6 N at 0.5 MPa, rising to 5497.8 N at 0.7 MPa. The B code gives a male rod thread on the 25 mm rod, and the 1/4" port feeds air filtered to 40 um across a 0.15-1.0 MPa (22-145 psi) working band. A fixed TPU bumper sits at both ends of the hard-anodized aluminium body, and the S45C hard-chrome rod runs at 30-500 mm/s.
The short ISO 21287-class body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why this bore size fits heavy clamping stations and press heads where a full-length body cannot. Note that this model is discontinued: the current-production direct is ACE100X80, so confirm the ISO 21287 mounting dimensions before swapping.
Airtac ACP Compact Cylinder ACP100X80B Technical Specifications
| Model | Airtac ACP Compact Cylinder ACP100X80B |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE100X80B |
| Bore size | Ø100 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE100X80B (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | 5154 N |
| Max (@1.0 MPa) | 801 kgf | |
The ACE100X80B produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac ACP Compact Cylinder ACP100X80B
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 100 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACP Compact Cylinder ACP100X80B Is Used
Heavy press head on a stamping fixture
5497.8 N at 0.7 MPa gives a 100 mm bore enough force to swage or stake steel brackets in an 80 mm stroke, and the short body slots into the press head where a full-length body will not fit.
Gate drive on a foundry sand line
The male rod thread (B code) bolts straight to a gate linkage, and the fixed TPU bumper decelerates the slide at both ends of the 80 mm travel in dusty, high-cycle foundry service.
Replacing the Airtac ACP Compact Cylinder ACP100X80B with the ACE100X80B
At 3927 N push at 0.5 MPa this 100 mm bore sits at the top of the compact range; if your load needs under 2513 N, the 80 mm bore does the same job in a smaller envelope, while nothing larger exists in this family. The 80 mm stroke is well inside the 300 mm maximum standard stroke for bore 100, so no made-to-order build is needed. Remember that a plain cylinder of this type drifts when air is lost - add a rod lock or pilot check valve if the load must stay put. This unit has no magnet because the -S code was not ordered, so CMSE or DMSE switches cannot be fitted; order ACP100X80BS if position sensing is planned. Either way, the current buy is the ACE100X80 replacement - confirm ISO 21287 dimensions first.
Replacement checklist
- ✓ Current-production ACE → ACE100X80B
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACP Compact Cylinder ACP100X80B FAQ
At 0.5 MPa the double-acting ACP100X80B pushes 3927 N and pulls 3681.6 N; at 0.7 MPa those figures rise to 5497.8 N push and 5154.2 N pull. The theoretical maximum at 1.0 MPa is 800.9 kgf. Working pressure is 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof pressure, air filtered to 40 um, and a speed range of 30-500 mm/s.
Yes, the ACP family is out of production; the current direct is ACE100X80, which matches the same 100 mm bore, 80 mm stroke and force class. Confirm the ISO 21287 mounting dimensions before swapping, since the ACP was built to a DIN standard. As configured, this unit has no magnet, so no CMSE or DMSE switch can be mounted; the optional -S magnet code is what enables sensing, and FA/FB flange, LB foot and CA/CB clevis mountings carry over in the ACE family.
Related AirTAC ACE Cylinders
Request a Quote for the ACE100X80B
Send us the quantity and destination. We confirm price, stock and lead time on the ACE100X80B replacement — usually within 7-8 hours.