This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACE100X80SB, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACP Compact Cylinder ACP100X80SB
The AirTAC ACP Compact Cylinder ACP100X80SB is a double acting DIN-standard tight/compact air cylinder with a Ø100mm bore and 80mm stroke, 1/4" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE100X80SB (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ100 mm
- Stroke80 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM16×1.5
- StatusDiscontinued → ACE100X80SB
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACP Compact Cylinder ACP100X80SB
A double acting compact cylinder in the DIN-standard ACP series, the ACP100X80SB pairs a 100 mm bore with an 80 mm stroke and a 25 mm hard-chrome S45C rod on a hard-anodized aluminium body. At 0.5 MPa it pushes 3927 N and pulls 3681.6 N; at 0.7 MPa those rise to 5497.8 N and 5154.2 N, with a theoretical ceiling of 800.9 kgf at 1.0 MPa. The short ISO 21287-class body saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into heavy presses and gantries where a full-length body will not fit.
This model carries the optional -S magnet, so CMSE or DMSE reed and solid-state switches can be clamped directly on the barrel for end-of-stroke signalling, and the B code gives a male rod thread. Note that ACP is discontinued: the current-production direct is the ACE100X80, so confirm ISO 21287 mounting dimensions before ordering.
Airtac ACP Compact Cylinder ACP100X80SB Technical Specifications
| Model | Airtac ACP Compact Cylinder ACP100X80SB |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE100X80SB |
| Bore size | Ø100 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE100X80SB (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | 5154 N |
| Max (@1.0 MPa) | 801 kgf | |
The ACE100X80SB produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac ACP Compact Cylinder ACP100X80SB
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 100 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACP Compact Cylinder ACP100X80SB Is Used
Pneumatic press fixture
The 3927 N push at 0.5 MPa swages or stakes aluminium housings on an assembly bench, with the 80 mm stroke clearing the part by hand between cycles.
Pallet gate actuator
Swings a heavy safety gate on a warehouse palletising line; the short body mounts where an ISO 15552 profile cylinder would overhang the guard.
Replacing the Airtac ACP Compact Cylinder ACP100X80SB with the ACE100X80SB
Size against neighbours: a 80 mm bore delivers 2513.3 N push at 0.5 MPa, while stepping up is not possible past 100 mm in this series, so the 100 mm bore is the top of the range at 3927 N. Keep speed within 30-500 mm/s and pressure within 0.15-1.0 MPa (22-145 psi). Remember that a plain cylinder drifts when air is lost; for a held load add a rod lock or pilot check valve. Mount with FA/FB flange, LB foot, CA/CB clevis, CR, SDB pivot or FTC brackets, and order the -S code if you need CMSE / DMSE switch readiness. For new builds, specify the ACE100X80 instead, since ACP is discontinued.
Replacement checklist
- ✓ Current-production ACE → ACE100X80SB
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACP Compact Cylinder ACP100X80SB FAQ
At 0.5 MPa the cylinder pushes 3927 N and pulls 3681.6 N; at 0.7 MPa it pushes 5497.8 N and pulls 5154.2 N; theoretical maximum is 800.9 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C, air filtered to 40 um, port 1/4" PT, rod 25 mm with male thread.
Order the ACE100X80, the current-production ISO 21287 successor: swap the P for an E and you get the same 100 mm bore, 80 mm stroke and force class in a matching short body. Confirm the ISO 21287 mounting dimensions against your fixture before swapping, because the ACP was built to a DIN-standard footprint. The fixed TPU bumper at both ends carries over on the ACE.
Related AirTAC ACE Cylinders
Request a Quote for the ACE100X80SB
Send us the quantity and destination. We confirm price, stock and lead time on the ACE100X80SB replacement — usually within 7-8 hours.