This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACE80X110, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACP Compact Cylinder ACP80X110
The AirTAC ACP Compact Cylinder ACP80X110 is a double acting DIN-standard tight/compact air cylinder with a Ø80mm bore and 110mm stroke, 1/4" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE80X110 (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ80 mm
- Stroke110 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM12×1.75
- StatusDiscontinued → ACE80X110
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACP Compact Cylinder ACP80X110
A double acting compact cylinder built to the DIN-standard short-body format, the ACP80X110 delivers 2513.3 N push and 2356.2 N pull at 0.5 MPa on an 80 mm bore with a 110 mm stroke. Air filtered to 40 um drives it across 0.15-1.0 MPa (22-145 psi), and speeds run from 30-500 mm/s. The hard-anodized aluminium body with an S45C hard-chrome 20 mm rod keeps the envelope tight, and the short ISO 21287-class body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into presses, gantries and guarding where a full-length body cannot go.
A fixed TPU bumper sits at both ends; it only decelerates the piston and never holds a load if air is lost. FA/FB flange, LB foot and CA/CB clevis brackets bolt to the standard mounting face, and the optional -S magnet enables CMSE / DMSE switches. This model is discontinued: the current-production direct is ACE80X110, so confirm ISO 21287 mounting dimensions before swapping.
Airtac ACP Compact Cylinder ACP80X110 Technical Specifications
| Model | Airtac ACP Compact Cylinder ACP80X110 |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE80X110 |
| Bore size | Ø80 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE80X110 (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2356 N |
| 0.7 MPa | 3519 N | 3299 N |
| Max (@1.0 MPa) | 513 kgf | |
The ACE80X110 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac ACP Compact Cylinder ACP80X110
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 80 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACP Compact Cylinder ACP80X110 Is Used
Pneumatic press head
The 2513.3 N push at 0.5 MPa (3518.6 N at 0.7 MPa) crimps and stakes aluminium terminals on an electronics assembly bench within a 110 mm working stroke.
Pallet gate actuator
Short-body mounting inside conveyor guarding swings a pallet-line stop gate, with the 1/4" port fed from the line manifold at 0.5 MPa.
Replacing the Airtac ACP Compact Cylinder ACP80X110 with the ACE80X110
At 0.5 MPa this bore pushes 2513.3 N; if your load needs under 981.7 N, the 50 mm bore costs less in air, while heavier work up to 3927.0 N calls for the 100 mm bore. Size the stroke at 110 mm against the 300 mm maximum standard for bore 80, so no made-to-order build is needed. If the rod must hold position with the valve centred, add a rod lock or pilot check valve, because the bumper does not lock. Order the -S code if you want CMSE / DMSE sensing, pick FA/FB, LB or CA/CB mounting, and note that ACE80X110 is the current replacement for this discontinued model.
Replacement checklist
- ✓ Current-production ACE → ACE80X110
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACP Compact Cylinder ACP80X110 FAQ
At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N; at 0.7 MPa those rise to 3518.6 N and 3298.7 N, with a theoretical maximum of 512.6 kgf at 1.0 MPa. The 80 mm bore has a 20 mm rod, a 1/4" port, female M12x1.75 rod thread, 0.15-1.0 MPa (22-145 psi) operating range, -20 to +70 C temperature limit and 30-500 mm/s speed. It is double acting with a fixed TPU bumper at each end.
Order ACE80X110, the ISO 21287 successor made by swapping the P for an E. It matches the same 80 mm bore, 110 mm stroke and force class, and accepts the same FA/FB flange, LB foot and CA/CB clevis brackets. Because the ACP was built to a DIN standard, confirm the ISO 21287 mounting dimensions against your fixture before swapping. If you need position sensing, the ACE takes the same optional-magnet approach with CMSE / DMSE switches.
Request a Quote for the ACE80X110
Send us the quantity and destination. We confirm price, stock and lead time on the ACE80X110 replacement — usually within 7-8 hours.