This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACE80X150, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACP Compact Cylinder ACP80X150
The AirTAC ACP Compact Cylinder ACP80X150 is a double acting DIN-standard tight/compact air cylinder with a Ø80mm bore and 150mm stroke, 1/4" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE80X150 (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ80 mm
- Stroke150 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM12×1.75
- StatusDiscontinued → ACE80X150
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACP Compact Cylinder ACP80X150
The ACP80X150 is a double acting compact cylinder with an 80 mm bore and 150 mm stroke, built to the DIN-standard short-body format: hard-anodized aluminium body, S45C hard-chrome piston rod, aluminium covers threaded onto the tube and a fixed TPU bumper at each end. At 0.5 MPa it pushes with 2513.3 N and pulls with 2356.2 N, rising to 3518.6 N push at 0.7 MPa. Its short ISO 21287-class body saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, which is why it slots into presses, gantries and guarding where a full-length body simply will not fit.
Note that this unit has no magnet fitted: order the optional -S code if you need CMSE or DMSE switches for position sensing. The ACP family is discontinued, so for new projects specify the current-production ACE80X150 and confirm the ISO 21287 mounting dimensions before swapping.
Airtac ACP Compact Cylinder ACP80X150 Technical Specifications
| Model | Airtac ACP Compact Cylinder ACP80X150 |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE80X150 |
| Bore size | Ø80 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE80X150 (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2356 N |
| 0.7 MPa | 3519 N | 3299 N |
| Max (@1.0 MPa) | 513 kgf | |
The ACE80X150 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac ACP Compact Cylinder ACP80X150
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 80 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACP Compact Cylinder ACP80X150 Is Used
Pneumatic press and clinching station
The 2513.3 N push at 0.5 MPa (3518.6 N at 0.7 MPa) suits a compact bench press crimping terminals or clinching sheet-metal inserts, where the short body fits under a fixed press head.
Injection-mould gate trimming slide
The 20 mm rod and 2356.2 N pull force at 0.5 MPa retract a trimming blade on a moulding-machine auxiliary slide, where the short body keeps the tooling footprint minimal.
Replacing the Airtac ACP Compact Cylinder ACP80X150 with the ACE80X150
At this force class the 80 mm bore delivers 2513.3 N push at 0.5 MPa; if your load is lighter, the 63 mm bore gives 1558.6 N push at the same pressure, and for heavier work the 100 mm bore reaches 3927.0 N. Stroke 150 mm is well inside the 300 mm maximum standard stroke for bore 80, so it is a catalogue item, not a made-to-order build. Remember the rod drifts when air is lost - for a held load add a rod lock or pilot check valve. FA/FB flange, LB foot and CA/CB clevis mountings bolt straight to the face. This model is discontinued; the direct successor is ACE80X150 in the same bore, stroke and force class - confirm ISO 21287 dimensions first.
Replacement checklist
- ✓ Current-production ACE → ACE80X150
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACP Compact Cylinder ACP80X150 FAQ
At 0.5 MPa the 80 mm bore produces 2513.3 N push and 2356.2 N pull; at 0.7 MPa it reaches 3518.6 N push and 3298.7 N pull. The theoretical maximum is 512.6 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi) with 1.5 MPa (215 psi) proof pressure, speed 30-500 mm/s, and the 150 mm stroke sits inside the 300 mm maximum standard stroke for this bore.
AirTAC no longer produces the ACP family. The current-production replacement is ACE80X150, an ISO 21287 compact cylinder in the same 80 mm bore, 150 mm stroke and force class. Because the ACP followed the DIN-standard format, verify the ISO 21287 mounting dimensions and port positions against your fixture before swapping. Mountings such as FA/FB flange, LB foot and CA/CB clevis are available on the ACE, and the optional -S magnet enables CMSE / DMSE switches.
Request a Quote for the ACE80X150
Send us the quantity and destination. We confirm price, stock and lead time on the ACE80X150 replacement — usually within 7-8 hours.