Airtac ACQD Double Acting Compact Cylinder ACQD20X10
The AirTAC ACQD Double Acting Compact Cylinder ACQD20X10 is a genuine double-acting COMPACT (JIS) cylinder with a piston rod out BOTH ends — a Ø20mm bore and 10mm stroke. The twin rods resist rotation and give equal push and pull force, so it carries and guides a tool platform without a separate anti-rotation guide.
- BoreØ20 mm
- Stroke10 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod
- Rod threadM5×0.8 (F) / M8×1.25 (B)
- CushionBumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACQD Double Acting Compact Cylinder ACQD20X10
The AirTAC ACQD20X10 is a double-acting JIS compact cylinder featuring a 10mm stroke and twin Ø10mm rods exiting both ends. Because a rod occupies each chamber, the annular area is identical in both directions, yielding equal push and pull forces of 117.8N at 0.5MPa and 164.9N at 0.7MPa. This symmetry is ideal for applications requiring consistent bi-directional thrust.
The dual-rod design inherently resists rotation and extends guiding length, eliminating the need for an external anti-rotation guide for small tool platforms. It incorporates fixed TPU bumpers at both ends for end-of-stroke deceleration rather than adjustable cushions. This specific unit utilizes an M5x0.8 female rod-end thread, an M5x0.8 PT port, and lacks a sensor magnet.
Airtac ACQD Double Acting Compact Cylinder ACQD20X10 Technical Specifications
| Model | Airtac ACQD Double Acting Compact Cylinder ACQD20X10 |
|---|---|
| Series | ACQD JIS compact double-rod cylinder |
| Bore size | Ø20 mm |
| Stroke | 10 mm |
| Acting type | Double acting, double rod |
| Port size | M5×0.8 |
| Rod end thread | M5×0.8 female / M8×1.25 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQD datasheet. A rod exits both ends, so both directions use the same annular area. Confirm against the product label before installation.
Theoretical Output Force (Ø20mm — equal both ways)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 118 N | 118 N |
| 0.7 MPa | 165 N | 165 N |
| Max (@1.0 MPa) | 24 kgf | |
Because a rod occupies both chambers, push and pull forces are EQUAL — the annular area applies in each direction. Actual usable force is lower due to friction; size with a safety margin.
Model Code: Airtac ACQD Double Acting Compact Cylinder ACQD20X10
| ACQD | JIS compact double-acting DOUBLE-ROD cylinder series. |
|---|---|
| 20 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch sensing (omit = none). |
| B | Male-thread piston rod (omit = female thread). |
Thread: PT standard (G / NPT available). The twin rods resist rotation and add guiding length. Related: ACQ (single rod), ACQJ (adjustable stroke), TACQ (guided).
Where the Airtac ACQD Double Acting Compact Cylinder ACQD20X10 Is Used
Symmetric Transfer
Drives a small parts shuttle on an electronics assembly line, using the equal push and pull thrust to maintain consistent timing in both directions.
Dual-Station Actuation
Actuates a tiny clamping fixture on a semiconductor tester, where the second protruding rod end simultaneously triggers a mechanical flag.
Twin-Guided Pusher
Pushes lightweight components into a packaging chute without twisting, relying on the twin rods to stabilize the tooling plate.
Is the Airtac ACQD Double Acting Compact Cylinder ACQD20X10 the Right Cylinder?
Selecting this 20mm bore provides 117.8N of thrust both ways at 0.5MPa; stepping down to a 16mm bore drops the force to 75.4N, while moving up to a 25mm bore increases it to 188.9N. If your mechanism only needs force in one direction, a single-rod ACQ offers a more compact footprint. For heavier lateral loads requiring extensive guidance, a guided TACQ might be preferable. When ordering, confirm the 10mm stroke, default female M5x0.8 rod thread, and PT porting.
Quick checklist
- ✓ Equal force both ways at your pressure
- ✓ Anti-rotation needed (twin rods)?
- ✓ Both rod ends usable for tooling?
- ✓ Magnet (S) for sensors?
- ✓ Female (blank) or male (B) rod thread
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Both rods share the load — keep force concentric.
- check Twin rods resist rotation but avoid heavy side load.
- check Handle the C-clip carefully; seat it fully in its groove.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACQD Double Acting Compact Cylinder ACQD20X10 FAQ
It generates equal push and pull forces of 117.8N at 0.5MPa and 164.9N at 0.7MPa, with a maximum capacity of 24kgf at 1.0MPa. The equal force is due to the annular area being identical on both sides. The maximum standard stroke available for this 20mm bore is 100mm.
No, it uses fixed TPU elastomer bumpers at both ends for deceleration, not adjustable air cushions. Additionally, while the body retains magnetic-switch grooves, this specific model ships without a sensor magnet. For high-speed approaches, an external shock absorber is recommended.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC ACQD Compact Cylinders
Request a Quote for Airtac ACQD Double Acting Compact Cylinder ACQD20X10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.