
The AirTAC Adjustable Compact Cylinder ACQJ50~63 ACQJ50X150-100B is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø50mm bore and 150mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The ACQJ50X150-100B is a double-acting JIS compact cylinder with a 50mm bore and a 150mm full stroke. An external M16x1.5 threaded stop with a lock nut limits the extend end position, giving a usable forward range of 50 to 150mm. The retract stroke remains completely unaffected by this adjustment. Because the piston area stays constant, force output is identical to a standard ACQ of the same bore.
It features fixed NBR elastomer bumpers at both ends for end-of-stroke deceleration rather than adjustable air cushions. The 150mm stroke exceeds the 100mm standard maximum for this bore, making it a long-stroke made-to-order variant. Equipped with a male M18x1.5 rod-end thread (-B), it couples directly to the load, while the body retains sensor grooves for mounting reed or solid-state switches (though this specific unit ships without a magnet).
| Model | Airtac Adjustable Compact Cylinder ACQJ50~63 ACQJ50X150-100B |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Full stroke | 150 mm |
| Adjuster thread | M16×1.5 |
| Port size | PT1/4 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M10×1.5 (F) / M18×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×150 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the exact extend position from 50 to 150mm on a machining fixture to accommodate varying part lengths without fabricating new mechanical stops.
Adjust the extend stroke on the fly during packaging line product changeovers to hit different carton sealing depths rapidly.
Test multiple end-of-stroke down positions on a light assembly press to find the optimal engagement depth before locking the nut.
To size correctly, compare this 50mm bore against its neighbors. Dropping to a 40mm bore reduces push force at 0.5MPa to 628.3N, while stepping up to a 63mm bore increases it to 1558.6N. If the exact 150mm forward travel is always required and never varies, a fixed-stroke ACQ cylinder will suffice. When ordering, confirm the 50mm bore, 150mm full stroke, 100mm adjustment window, the male M18x1.5 rod thread (-B), and whether a -S magnet is needed for sensor detection.
Quick checklist
The external M16x1.5 stop allows the extend stroke to be shortened by up to 100mm, yielding a usable forward range of 50 to 150mm.
No. The adjuster only limits how far the rod extends, leaving the retract stroke unaffected. Force remains identical to a standard ACQ because the piston area is unchanged. The unit uses fixed elastomer bumpers for deceleration, so for high-energy loads an external shock absorber is recommended.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.