
The AirTAC Adjustable Compact Cylinder ACQJ50~63 ACQJ50X200-100B is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø50mm bore and 200mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The ACQJ50X200-100B is a double-acting JIS compact cylinder with a 200mm full stroke and a 100mm external adjustment window. An external M16x1.5 threaded stop and lock nut lets you fine-tune the extend end position on the machine, yielding a usable extend range of 100 to 200mm without changing parts. The retract stroke remains completely unaffected. This unit is a long-stroke made-to-order variant, as 200mm exceeds the 100mm standard maximum for this bore.
Because the piston area is unchanged, the adjuster alters stroke length only and force stays identical to a standard ACQ of the same size. The body features fixed NBR elastomer bumpers at each end for end-of-stroke deceleration, plus sensor grooves. This specific configuration ships without a magnet and includes a male M18x1.5 rod end for direct load coupling.
| Model | Airtac Adjustable Compact Cylinder ACQJ50~63 ACQJ50X200-100B |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Full stroke | 200 mm |
| Adjuster thread | M16×1.5 |
| Port size | PT1/4 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M10×1.5 (F) / M18×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×200 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the exact extend position from 100 to 200mm on a CNC machining fixture to clamp raw castings of varying widths without swapping out the actuator.
Adjust the extend stop on a packaging line diverter to accommodate different carton lengths during rapid product changeovers, saving retooling time.
Set trial end positions on an assembly press for pressing bearings, using the external stop to test insertion depths before finalizing the mechanical setup.
If your end position never varies, a fixed-stroke ACQ cylinder suffices and avoids the adjuster overhang. For this made-to-order 200mm long-stroke model, confirm the 100mm adjustment window, the male M18x1.5 rod thread, the PT1/4 port, and that no magnet (-S) is required. Note that a plain compact cylinder will not hold a load on air loss; for fail-safe holding, add an external rod lock or pilot-operated check valve.
Quick checklist
This 50mm bore cylinder has a 200mm full stroke with a 100mm adjustment window, giving a usable extend range of 100-200mm. The retract stroke is unaffected.
An external M16x1.5 threaded stop with a lock nut limits the extend stroke without changing the piston area, meaning force remains identical to a standard ACQ. The cylinder uses fixed NBR elastomer bumpers at each end for deceleration rather than adjustable air cushions; for high kinetic energy loads, add an external shock absorber. This model ships without a magnet, though the body retains sensor grooves for adding reed or solid-state switches if needed.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.