Airtac Adjustable Cylinder SAIJ32 SAIJ32AX195-10
The AirTAC Airtac Adjustable Cylinder SAIJ32 SAIJ32AX195-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 195mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke195 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX195-10
The AirTAC SAIJ32X195-10 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a usable travel window of 185 to 195 mm, allowing you to trim up to 10 mm off the nominal stroke during machine setup. In the 32 mm bore class, it delivers 402 N of push force at 0.5 MPa, making it well-suited for lighter-duty positioning tasks.
This variant features an SUS420J2 stainless steel piston rod for enhanced corrosion resistance compared to standard carbon steel. The barrel is an extruded aluminum profile with sensor grooves on both sides, and it connects via PT tapered ports. The rear adjuster acts purely as a mechanical stop to set the end position; it does not lock or hold the load without continuous air pressure.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX195-10 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX195-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 195 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX195-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×195 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX195-10 Is Used
End-Position Tuning
Dial in the exact retract distance within the 185-195 mm window during commissioning to accommodate minor mechanical variations.
Machine Changeover
Quickly adjust the stroke stop for different product sizes on a packaging line without replacing the entire cylinder.
Light-Duty Positioning
Leverage the 402 N push force at 0.5 MPa for precise movement of smaller jigs and fixtures in assembly stations.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX195-10 the Right Cylinder?
Choose this 32 mm bore cylinder when you need precise end-position tuning without adding external stops or swapping components. If your application requires greater thrust, stepping up to a 40 mm bore provides 628 N of push force at 0.5 MPa. Conversely, if the 195 mm stroke is excessive, a shorter standard SAI model might be simpler, but this SAIJ unit is ideal for variable product sizes. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, omitting the FB, CA, CB, and CR styles. Because it lacks a magnet, it does not support AirTAC CMSE or DMSE sensors. For load-holding without live air pressure, consider the SAIL or BSAI series instead.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX195-10 FAQ
The nominal stroke is 195 mm, but the rear adjuster allows you to shorten the effective travel by up to 10 mm, creating a usable stroke window of 185 to 195 mm.
At 0.5 MPa, the 32 mm bore provides 402 N of push force and 345 N of pull force. At the maximum operating pressure of 1.0 MPa, it can deliver up to 82 kgf.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX195-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.