Airtac Adjustable Cylinder SAIJ32 SAIJ32AX195-100
The AirTAC Airtac Adjustable Cylinder SAIJ32 SAIJ32AX195-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 195mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke195 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX195-100
The AirTAC SAIJ32X195-100 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 95-195 mm, allowing you to dial back the 195 mm nominal stroke by up to 100 mm during commissioning. Delivering 402 N of push force at 0.5 MPa, it handles light-duty positioning with standard G1/8 ports.
This model uses an SUS420J2 stainless steel rod for superior corrosion resistance compared to standard carbon steel. The extruded aluminum barrel includes sensor grooves on both sides, ready for CMSE reed or DMSE electronic switches if needed later. The rear adjuster acts purely as a mechanical stop to fine-tune the end position without adding external stops.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX195-100 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX195-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 195 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX195-100
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×195 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX195-100 Is Used
Machine Changeover
Dial in the 95-195 mm travel window on the fly to accommodate new product lengths without replacing the cylinder or adding external stopper blocks.
End-Position Tuning
Fine-tune the retract end-of-stroke within the 100 mm adjustment range during initial commissioning to perfect pickup alignment.
Light-Duty Positioning
Leverage the 402 N push force and SUS420J2 stainless rod for precise, corrosion-resistant component placement in varied environments.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX195-100 the Right Cylinder?
Choose this 32 mm bore when you need precise end-position tuning without swapping cylinders, delivering 402 N push force at 0.5 MPa. If your application requires more thrust, stepping up to the 40 mm bore yields 628 N at the same pressure. The SAIJ32X195-100 omits the FB, CA, CB, and CR mounts, offering a focused set of ISO 15552 interfaces: Basic, FA, LB, TC, FTC, TCM1, and TCM2. It uses PT tapered port threads. Because the rear adjuster is a travel stop and not a lock, it will not hold a load without live air pressure; for fail-safe load holding, consider an AirTAC SAIL or BSAI cylinder.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX195-100 FAQ
At 0.5 MPa operating pressure, the 32 mm bore provides 402 N of push force and 345 N of pull force. At 0.7 MPa, the push force increases to 563 N.
The nominal stroke is 195 mm, but the rear adjuster allows you to shorten the effective travel by up to 100 mm. This creates a usable stroke window of 95-195 mm for exact end-position tuning.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX195-100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.