Airtac Adjustable Cylinder SAIJ32 SAIJ32AX195-10S
The AirTAC Airtac Adjustable Cylinder SAIJ32 SAIJ32AX195-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 195mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke195 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX195-10S
The AirTAC SAIJ32X195-10-S is a double-acting ISO 15552 profile cylinder equipped with a rear mechanical adjuster, allowing you to dial back the nominal 195 mm stroke by up to 10 mm. This creates a precise 185-195 mm usable travel window, enabling fine end-position tuning at commissioning without swapping out the cylinder or adding bulky external stops. Delivering 402 N of push force at 0.5 MPa, it suits light-duty positioning tasks.
This variant features a SUS420J2 stainless steel rod (material code A) for improved corrosion resistance and utilizes PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides, and because this SKU includes a magnet (-S), it directly supports AirTAC CMSE reed and DMSE electronic solid-state switches for precise end-of-travel detection.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX195-10S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX195-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 195 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX195-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×195 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX195-10S Is Used
Machine Commissioning
Fine-tune the 185-195 mm travel window during initial setup to perfectly strike a mechanism without machining new hard stops.
Product Changeover
Quickly adapt the end-of-stroke position on a packaging line when switching to a slightly different carton size.
Light-Load Positioning
Drive small pneumatic actuators delivering 402 N of push force where exact end-positioning matters more than raw power.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX195-10S the Right Cylinder?
Choose this 32 mm bore when your application requires around 402 N of push force at 0.5 MPa. If your load demands greater thrust, stepping up to the 40 mm bore yields 628 N, whereas dropping to a smaller bore would leave you underpowered. The adjustable stroke is ideal for machine setups requiring variable end-stops or product changeovers, whereas a fixed-stroke SAI cylinder is better for rigid, unchanging travel limits.
For replacements, match the 32 mm bore, 195 mm nominal stroke, 10 mm adjuster, PT port thread, and the -S magnet requirement. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2—omitting the FB, CA, CB, and CR brackets. Remember that the rear adjuster acts only as a travel stop; it does not hold the load without live air. For true fail-safe load holding, consider an SAIL or BSAI cylinder instead.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX195-10S FAQ
At a 0.5 MPa operating pressure, this 32 mm bore cylinder provides 402 N of push force and 345 N of pull force. At the maximum 1.0 MPa pressure, it can deliver up to 82 kgf.
The rear adjuster screw lets you shorten the effective travel from the nominal 195 mm down to 185 mm, creating a 10 mm adjustable window. This stopper only sets the travel end and decelerates the load; it does not lock or hold the position without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX195-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.