Airtac Adjustable Cylinder SAIJ32 SAIJ32AX195-30
The AirTAC Airtac Adjustable Cylinder SAIJ32 SAIJ32AX195-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 195mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke195 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX195-30
The AirTAC SAIJ32X195-30 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 165-195 mm, allowing you to dial back the nominal 195 mm stroke by up to 30 mm during commissioning without swapping out the unit. In the 32 mm bore class, it generates 402 N of push force and 345 N of pull force at 0.5 MPa.
This variant uses a SUS420J2 stainless steel rod (code A) for improved corrosion resistance compared to standard carbon steel. The barrel is an extruded aluminum profile with sensor grooves on both sides, and air cushioning at both ends handles end-of-stroke deceleration. The rear adjuster acts strictly as a travel stop and does not lock the load without live air pressure.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX195-30 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX195-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 195 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX195-30
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×195 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX195-30 Is Used
Machine Changeover
Dial in the exact end position from 165 to 195 mm during product size changes without adding external physical stops to the machine frame.
Assembly Positioning
Provides 402 N of push force at 0.5 MPa for pressing or locating small parts, with a stainless SUS420J2 rod for environments needing corrosion resistance.
End-Stop Calibration
Use the rear adjuster to fine-tune the retract end position during commissioning, compensating for mechanical tolerances in the fixture.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX195-30 the Right Cylinder?
Choose this 32 mm bore when your application requires up to 402 N of push force at 0.5 MPa; stepping down is not an option in the SAIJ range, while stepping up to a 40 mm bore yields 628 N. The 30 mm adjustment range is perfect for product changeovers on a line, letting you fine-tune the end position rather than installing external stops or ordering a fixed-stroke SAI cylinder. Remember that the rear screw and air cushions only set the travel end; for true load-holding without live air, select a SAIL or BSAI cylinder.
When replacing an ISO 15552 cylinder, match the 32 mm bore, 195 mm stroke, PT tapered port threads, and the required mounting bracket. SAIJ supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR. Because the 195 mm stroke is under 300 mm, side-load concerns are minimal, but always ensure the M10x1.25 rod thread is properly aligned to avoid binding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX195-30 FAQ
It features a rear adjusting screw that lets you shorten the effective stroke by up to 30 mm. This creates a usable travel window of 165 to 195 mm, allowing precise end-position tuning at commissioning without changing the cylinder.
At an operating pressure of 0.5 MPa, the SAIJ32X195-30 provides 402 N of push force and 345 N of pull force. It can reach up to 724 N of push force at 0.9 MPa.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX195-30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.