Airtac Adjustable Cylinder SAIJ32 SAIJ32AX225-50
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX225-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 225mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke225 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX225-50
The AirTAC SAIJ32X225-50 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that permits up to 50mm of travel reduction. This creates a usable stroke window of 175-225mm, enabling precise end-position tuning at commissioning without swapping out the physical cylinder. The extruded aluminum barrel includes sensor grooves on both sides for straightforward switch placement.
It uses a PT tapered G1/8 port and variable air cushions at both ends to regulate impact deceleration.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX225-50 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX225-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 225 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX225-50
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX225-50 Is Used
Machine Changeover
Dial in the exact 175-225mm travel window during product size changes without physically swapping cylinders or repositioning hard stops.
End-Stop Calibration
Fine-tune the retract end-position during commissioning to perfect seating or clamping forces on delicate workpieces.
Variable Sorting Stroke
Adjust the effective travel on a sorting diverter to handle different package sizes on the fly.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX225-50 the Right Cylinder?
The 50mm adjustment range is ideal for product changeovers on a line, allowing operators to dial in the exact 175-225mm travel without adding external mechanical stops.
For ISO 15552 replacement matching, verify the 32mm bore, 225mm stroke, 50mm adjustment, PT G1/8 port, and basic mounting setup. Note that the rear adjuster acts only as a travel stop and does not hold the load without live air pressure; for load-holding requirements, consider an SAIL or BSAI cylinder. Since the stroke is 225mm, ensure external guides are used to manage side-load stresses on the 12mm rod.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX225-50 FAQ
The rear adjuster screw allows you to shorten the effective stroke by up to 50mm from the nominal 225mm, providing a usable travel window of 175-225mm for fine-tuning the end position without replacing the cylinder.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX225-50
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.