Airtac Adjustable Cylinder SAIJ32 SAIJ32AX230-100S
The AirTAC Airtac Adjustable Cylinder SAIJ32 SAIJ32AX230-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 230mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke230 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX230-100S
The AirTAC SAIJ32X230-100-S is a double-acting, single-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. Equipped with a -S magnet for position sensing, it integrates seamlessly with AirTAC CMSE reed and DMSE electronic solid-state switches fitted into the dual-side sensor grooves. The SUS420J2 stainless steel rod (code A) provides enhanced corrosion resistance for demanding environments.
This model provides a 230 mm nominal stroke with an adjustment range of 100 mm, creating a usable travel window from 130 to 230 mm. It delivers 402 N of push force at 0.5 MPa and uses PT tapered G1/8 ports. The rear stopper allows precise end-position tuning during commissioning without adding external stops, while the extruded aluminum barrel maintains a true ISO 15552 mounting interface.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX230-100S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX230-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 230 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX230-100S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×230 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX230-100S Is Used
Variable End-Stop Setup
Dial in the exact retract position from 130 to 230 mm during machine commissioning to accommodate varying material lengths without physical hardware changes.
Product Size Changeover
Quickly shift the stroke window on packaging lines when switching between different carton sizes, using the rear adjuster to fine-tune the end position.
Sensor-Driven Positioning
Leverage the integrated magnet with DMSE electronic sensors to confirm end-of-travel at the newly adjusted stop, ensuring repeatable cycle timing.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX230-100S the Right Cylinder?
Choose this 32 mm bore when your application requires 402 N of push force at 0.5 MPa and highly variable end-stops. The 100 mm adjustment window is ideal for product changeovers on a line, letting you dial back the travel from 230 mm to 130 mm without swapping the cylinder. If your setup needs less force, drop to a 20 mm bore (345 N pull); if you require more thrust, step up to a 40 mm bore (528 N pull).
The rear screw acts strictly as a travel stop and does not hold the load without live air. For load-holding without continuous pressure, consider the SAIL (air-released lock) or BSAI (clamp-lock) series. This SAIJ variant uses PT tapered port threads and supports the reduced SAIJ mounting set: Basic, FA, LB, TC, FTC, TCM1, and TCM2. Because the stroke is 230 mm, ensure adequate external guiding to prevent excessive side-load wear on the 12 mm rod and M10x1.25 thread.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX230-100S FAQ
At 0.5 MPa operating pressure, this 32 mm bore cylinder provides 402 N of push force and 345 N of pull force. It can deliver up to 724 N of push force at 0.9 MPa.
The rear adjuster screw allows you to shorten the effective stroke from its 230 mm nominal length by up to 100 mm, providing a usable travel window of 130 to 230 mm. It functions as a mechanical stop and does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX230-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.