Airtac Adjustable Cylinder SAIJ32 SAIJ32AX230-50S
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX230-50S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 230mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke230 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX230-50S
The AirTAC SAIJ32X230-50-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 230 mm nominal stroke that can be dialed back by up to 50 mm, creating a precise 180-230 mm usable travel window for product changeovers.
This variant includes an SUS420J2 stainless steel rod (code A) for improved corrosion resistance and carries a magnet (-S) for use with CMSE reed and DMSE electronic sensors. The extruded aluminum barrel features sensor grooves on both sides, and the rear stopper allows mechanical end-position tuning without adding external stops.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX230-50S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX230-50S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 230 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX230-50S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×230 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX230-50S Is Used
Product Changeover
Dial in the 180-230 mm travel window during format changes without physically swapping cylinders or adding external mechanical stops.
End-Position Tuning
Fine-tune the retract stroke by up to 50 mm at commissioning to perfect the resting position of delicate tooling.
Sensor-Ready Actuation
Leverage the built-in magnet for CMSE or DMSE switches to confirm the adjusted end position in automated control systems.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX230-50S the Right Cylinder?
The adjustable 180-230 mm window is ideal for machines running multiple product sizes, letting you fine-tune the retract end at commissioning rather than swapping a fixed-stroke SAI cylinder. Because the 230 mm stroke exceeds 300 mm? No, but for any extended stroke, ensure external guides support the load to prevent rod binding.
For ISO 15552 replacement matching, specify bore 32, stroke 230, adjustment 50, PT tapered port thread, and the -S magnet. Note that the rear adjuster acts only as a travel stop and does not hold the load without live air; for positive load-holding without pressure, consider an external rod lock or the SAIL/BSAI series. SAIJ supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX230-50S FAQ
At 0.7 MPa, the push force increases to 563 N.
The rear adjuster acts as a mechanical stop that lets you shorten the effective stroke from its 230 mm nominal length down to 180 mm. It only sets the travel end and does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX230-50S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.