Airtac Adjustable Cylinder SAIJ32 SAIJ32AX250-30S
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX250-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 250mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke250 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX250-30S
The AirTAC SAIJ32X250-30-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, providing a usable travel window of 220 to 250 mm. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting.
This variant features an SUS420J2 stainless steel rod and a built-in magnet for position sensing. The PT tapered port ensures a tight pneumatic connection. The rear adjustment screw allows precise end-position tuning during commissioning without adding external stops.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX250-30S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX250-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 250 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX250-30S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×250 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX250-30S Is Used
Machine Setup Tuning
Dial in the exact retract end-position within the 220-250 mm window during commissioning without swapping out the entire cylinder.
Product Size Changeover
Quickly adjust the stroke length on packaging lines when handling different product sizes, using the 30 mm trim range to adapt the stop.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX250-30S the Right Cylinder?
If your application requires greater force, stepping up to the 40 mm bore yields 628 N. An adjustable stroke is preferred over a fixed SAI cylinder when you need a variable end-stop for product changeovers. The rear adjuster acts only as a travel stop and does not hold the load without live air; for true load-holding, consider the SAIL or BSAI series. This model uses PT ports and the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting FB, CA, CB, and CR options.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX250-30S FAQ
At 0.7 MPa, the push force increases to 563 N.
The rear adjuster screw lets you shorten the nominal 250 mm stroke by up to 30 mm, creating a usable travel window of 220 to 250 mm. It functions as a mechanical stop and does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX250-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.