Airtac Adjustable Cylinder SAIJ32 SAIJ32AX260-10S
The AirTAC Airtac Adjustable Cylinder SAIJ32 SAIJ32AX260-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 260mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke260 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX260-10S
The AirTAC SAIJ32X260-10-S is a double-acting, single-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 250-260 mm usable travel window, allowing you to dial back the 260 mm nominal stroke by up to 10 mm during commissioning without adding external stops. It delivers 402 N of push force at 0.5 MPa and features a SUS420J2 stainless steel rod for improved corrosion resistance.
This model includes a magnet for CMSE reed and DMSE electronic sensors, fitting neatly into the extruded aluminum barrel's dual sensor grooves. It uses a G1/8 port and M10x1.25 rod thread. The rear adjustment screw sets the retract end position but acts only as a travel stop, meaning it will not hold the load without live air pressure.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX260-10S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX260-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 260 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX260-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×260 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX260-10S Is Used
Machine Changeover
Fine-tune the 250-260 mm retract position on the fly during product size or format changes without swapping the cylinder.
End-Stop Calibration
Dial in the exact end-of-stroke contact point during initial commissioning to prevent crushing delicate workpieces.
Variable Positioning
Adjust the travel window by up to 10 mm to accommodate minor variations in feeding lengths or material thickness.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX260-10S the Right Cylinder?
Choose this 32 mm bore cylinder when an application requires exact end-position tuning at machine changeover, stepping down from a 40 mm bore that yields 628 N push force if your force margin is too high. The 10 mm adjustment window lets you perfect the retract stroke on the fly, a flexibility a fixed SAI cylinder cannot match. For load-holding without live pressure, this cylinder is not a lock; consider an AirTAC SAIL or BSAI series instead. When replacing an ISO 15552 unit, match the PT tapered port, the SUS420J2 rod material, and the -S magnet specification.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX260-10S FAQ
At 0.5 MPa operating pressure, this 32 mm bore cylinder provides 402 N of push force and 345 N of pull force. At the maximum 1.0 MPa pressure, it delivers up to 82 kgf.
The rear adjuster screw lets you shorten the 260 mm nominal stroke by up to 10 mm, creating a 250-260 mm usable travel window. It acts as a mechanical stop to set the retract end position and does not function as a load lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX260-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.