Airtac Adjustable Cylinder SAIJ32 SAIJ32AX280-50S
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX280-50S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 280mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke280 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX280-50S
The AirTAC SAIJ32X280-50-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster.
This variant includes an -S magnet for CMSE reed and DMSE electronic sensors, utilizing the dual sensor grooves on the extruded aluminum barrel. It features a SUS420J2 stainless steel rod (code A) for improved corrosion resistance and uses PT tapered port threads with a G1/8 connection.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX280-50S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX280-50S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 280 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX280-50S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×280 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX280-50S Is Used
Product Changeover
Dial in the 230-280mm travel window during machine setup to accommodate different product lengths without changing the cylinder.
End-Position Tuning
Fine-tune the retract end position at commissioning to achieve precise mechanical alignment without adding external stopper blocks.
Sensor-Driven Sorting
Leverage the -S magnet with DMSE electronic sensors to trigger diverter arms accurately within the adjusted travel range.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX280-50S the Right Cylinder?
The adjustable rear stopper lets you dial in the 230-280mm travel window during commissioning without adding external stops or swapping a fixed-stroke SAI cylinder. Remember that the rear adjuster functions only as a travel stop, not a lock, so it will not hold the load without live air pressure.
Because this 280mm stroke is relatively long for a 32mm bore, the 12mm rod and M10x1.25 thread still require external guiding to prevent excessive side-loading. This SAIJ model uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits FB, CA, CB, and CR brackets. For exact ISO 15552 interchangeability, match the 32mm bore, 280mm stroke, 50mm adjustment, PT G1/8 port, and -S magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX280-50S FAQ
At 0.7 MPa, the push force increases to 563N.
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the effective travel from the 280mm nominal stroke down to 230mm. It only sets the end position and does not lock the load without air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX280-50S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.