Airtac Adjustable Cylinder SAIJ32 SAIJ32AX425-10S
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX425-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 425mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke425 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX425-10S
The AirTAC SAIJ32X425-10-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. The extruded aluminum barrel includes sensor grooves on both sides, and the -S magnet supports CMSE reed and DMSE electronic solid-state switches for precise position detection.
This model uses a SUS420J2 stainless steel rod (code A) for improved corrosion resistance and pairs with PT tapered port threads (G1/8). The rear adjuster acts purely as a mechanical stop to fine-tune the end position without swapping the cylinder, while the variable air cushions at both ends manage deceleration. Remember that neither the adjuster nor the cushion holds the load without live air pressure; for true load-holding, consider an external rod lock or the SAIL series.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX425-10S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX425-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 425 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX425-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×425 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX425-10S Is Used
End-Stop Calibration
Dial in the exact 415-425mm retraction point during machine setup to accommodate varying material thicknesses without replacing the actuator.
Product Changeover
Quickly adjust the stroke stop by up to 10mm on packaging lines when switching between different product sizes, minimizing downtime.
Sensor-Driven Positioning
Leverage the integrated -S magnet with DMSE electronic sensors to confirm the adjusted end position in automated assembly fixtures.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX425-10S the Right Cylinder?
Select this 32mm bore cylinder when an application requires precise end-position tuning on a 425mm stroke, avoiding the need to bolt on external stops or swap components during product changeovers. Because this is a 425mm stroke, the 12mm diameter rod and M10x1.25 rod thread will experience leverage forces under side loading; an external guide mechanism is recommended to prevent premature seal wear.
For an exact ISO 15552 replacement match, verify a 32mm bore, 425mm stroke, 10mm adjustment range, PT port thread, and the -S magnet option. This SAIJ configuration supports the Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounting set, omitting FB, CA, CB, and CR brackets. The operating speed ranges from 30-800 mm/s.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX425-10S FAQ
If operated at 0.7 MPa, the push force increases to 563N.
The rear adjusting screw acts as a mechanical stop, allowing you to shorten the 425mm nominal stroke by up to 10mm, creating a 415-425mm usable travel window. It only sets the travel end and does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX425-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.