Airtac Adjustable Cylinder SAIJ32 SAIJ32AX50-50S
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX50-50S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 50mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke50 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX50-50S
The AirTAC SAIJ32X50-50-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. The built-in magnet supports CMSE reed and DMSE electronic sensors.
This specific SKU provides a 0-50mm usable travel window from its 50mm nominal stroke. The rear adjuster acts as a mechanical stop to fine-tune the retract end position during commissioning without adding external stops. It uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and relies on adjustable air cushions at both ends for deceleration.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX50-50S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX50-50S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX50-50S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX50-50S Is Used
Machine Changeovers
Dial in the retract stroke from 0 to 50mm during product size changeovers without physically swapping the cylinder or adding external stopper blocks.
End-Position Tuning
Fine-tune the exact end-of-stroke position during machine commissioning to synchronize pick-and-place movements within a tight 50mm window.
Sensor-Ready Testing
Utilize the integrated magnet with DMSE electronic sensors to verify intermediate positions during variable stroke testing routines.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX50-50S the Right Cylinder?
Choose this 32mm bore when an application requires precise end-position tuning within a 0-50mm travel window. The 12mm rod and M10x1.25 thread handle moderate side loads, but long unsupported strokes still require an external guide.
Select the adjustable SAIJ over a fixed SAI cylinder when accommodating product size changeovers on a single line. Remember that the rear adjuster is a travel stop, not a lock; the SAIJ will not hold a load without live air. For fail-safe load holding, consider the SAIL or BSAI series. This SAIJ32X50-50-S is dimensionally interchangeable per ISO 15552 and includes the -S magnet for position sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX50-50S FAQ
The operational speed range for this 32mm bore cylinder is 30-800 mm/s.
The rear adjuster screw allows you to mechanically shorten the effective stroke from 0 up to 50mm. It functions as a physical stop for end-position tuning and does not lock the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX50-50S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.