Airtac Adjustable Cylinder SAIJ32 SAIJ32AX500-10
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX500-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 500mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke500 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX500-10
The AirTAC SAIJ32X500-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the travel window down to 490-500 mm. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting.
This adjustable-stroke design eliminates the need to swap cylinders or add external stops during commissioning. The rear adjuster screw acts purely as a travel stop and does not hold the load without live air pressure. It supports a speed range of 30-800 mm/s and offers mounting options including Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX500-10 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX500-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX500-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX500-10 Is Used
Machine Setup Tuning
Dial in the exact 490-500 mm end position during initial commissioning to perfect product placement without machining new stopper blocks.
Product Changeovers
Quickly shorten the stroke by up to 10 mm on packaging lines when handling slightly smaller product dimensions.
Variable End Stops
Use the rear adjuster to set precise retract positions for delicate assembly tasks requiring exact 500 mm travel limits.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX500-10 the Right Cylinder?
Choose this 32 mm bore when you need precise end-position tuning at machine setup without swapping hardware. Because this cylinder features a 500 mm stroke, the 12 mm rod diameter and M10x1.25 thread mean you should use an external guide to prevent side-load damage on the piston.
For an exact ISO 15552 replacement, match the 32 mm bore, 500 mm stroke, 10 mm adjustment range, PT port thread, and standard non-magnet configuration. Since this plain SAIJ model lacks a magnet, it cannot use AirTAC CMSE or DMSE sensors. If you need to hold a load without live air pressure, select the SAIL or BSAI series instead, as this rear adjuster is only a stop, not a lock.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX500-10 FAQ
The rear adjuster screw lets you trim the effective travel window from 500 mm down to 490 mm. It acts as a mechanical stop to fine-tune end positions at commissioning, but it does not lock or hold the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX500-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.