Airtac Adjustable Cylinder SAIJ32 SAIJ32AX500-40S
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX500-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 500mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke500 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX500-40S
The AirTAC SAIJ32X500-40-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 460-500mm usable travel window, allowing you to dial back the 500mm nominal stroke by up to 40mm during commissioning.
This model includes a magnet (-S) for position sensing with AirTAC CMSE reed or DMSE electronic switches. The rear adjuster acts purely as a mechanical stop to fine-tune the retract end position without swapping cylinders. It uses variable air cushions at both ends and shares the standard extruded aluminum barrel with sensor grooves on both sides.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX500-40S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX500-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX500-40S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX500-40S Is Used
Machine Changeover
Quickly fine-tune the retract end position by up to 40mm when switching between product sizes on a packaging line, eliminating the need for external stopper blocks.
Variable End-Stops
Dial in the exact 460-500mm travel window required for delicate placement tasks without physically modifying the cylinder mounting or changing the whole actuator.
Commissioning Setup
Perfect for long-stroke assemblies where minor mechanical variances need to be absorbed at startup, letting operators set the exact retract distance via the rear screw.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX500-40S the Right Cylinder?
Choose this 32mm bore when an application requires precise end-position tuning on a long stroke, delivering 345N pull force at 0.5 MPa. The 40mm adjustment range is perfect for machine setups requiring variable end-stops during product changeovers, avoiding the need for fixed-stroke SAI cylinders or external stops. If your setup needs higher thrust, stepping up to a 40mm bore yields 528N of pull force at 0.5 MPa.
Because the stroke is 500mm, the 12mm diameter rod and M10x1.25 thread face higher deflection risks; an external guide is recommended to prevent side-load damage. To replace this ISO 15552 cylinder, match the 32mm bore, 500mm stroke, 40mm adjustment, PT port, Basic/LB/TC mounting, and -S magnet. Note that the rear adjuster and air cushions do not hold the load without live air; for true load-holding, consider an SAIL or BSAI cylinder.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX500-40S FAQ
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the 500mm nominal stroke by up to 40mm. This creates a 460-500mm usable travel window for fine-tuning the end position without replacing the cylinder.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX500-40S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.