Airtac Adjustable Cylinder SAIJ32 SAIJ32AX60-10S
The AirTAC Airtac Adjustable Cylinder SAIJ32 SAIJ32AX60-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 60mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke60 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX60-10S
The AirTAC SAIJ32X60-10-S is a double-acting, single-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It delivers 402N of push force at 0.5 MPa and features a 12mm rod with M10x1.25 threading. The built-in adjuster allows you to trim the nominal 60mm stroke back by up to 10mm, creating a precise 50-60mm usable travel window for fine-tuning end positions at commissioning.
This variant includes a SUS420J2 stainless steel rod (material code A) and a magnet for position sensing. It uses PT tapered ports (G1/8) and supports speeds from 30-800 mm/s. The extruded aluminum barrel features sensor grooves on both sides for direct mounting of CMSE reed or DMSE electronic switches, while the rear adjuster acts purely as a travel stop without holding the load without live air.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX60-10S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX60-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX60-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX60-10S Is Used
Machine Changeover
Dial in the exact 50-60mm end-stop during product size changeovers without replacing the cylinder or repositioning external physical stops.
Assembly Calibration
Fine-tune the retract position during initial commissioning to perfect part seating or clamping force using the 10mm rear adjustment screw.
Light Pressing
Apply 402N of push force at 0.5 MPa for precise light-duty pressing tasks, using the adjustable window to set exact travel limits.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX60-10S the Right Cylinder?
Select this 32mm bore when an application requires 402N push force at 0.5 MPa but demands on-the-fly end-position tuning without swapping cylinders or adding external stops. If your process needs less force, stepping down is an option, but if you require greater clamping or pressing power, consider stepping up to the 40mm bore which provides 628N push force. The adjustable 50-60mm window is ideal for accommodating minor product size changes on a machine line.
For ISO 15552 replacement matching, verify the 32mm bore, 60mm nominal stroke, 10mm adjustment range, PT G1/8 port, and the -S magnet requirement. This SAIJ model supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR. Remember that the rear adjuster and air cushions only decelerate the travel end; for true load-holding without live air pressure, look to the SAIL or BSAI series.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX60-10S FAQ
At 0.5 MPa operating pressure, this 32mm bore cylinder provides 402N of push force and 345N of pull force. At the maximum 1.0 MPa pressure, it delivers up to 82 kgf.
The rear adjuster screw allows you to shorten the effective travel from the nominal 60mm down to 50mm, creating a 50-60mm usable window. This stopper fine-tunes the end position but does not lock or hold the load without continuous live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX60-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.