Airtac Adjustable Cylinder SAIJ32 SAIJ32AX600-10S
The AirTAC Airtac Adjustable Cylinder SAIJ32 SAIJ32AX600-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 600mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke600 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX600-10S
The AirTAC SAIJ32X600-10-S is a double-acting, single-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 590 to 600 mm usable travel window, allowing you to dial back the retract position by up to 10 mm during commissioning. It delivers 402 N of push force at 0.5 MPa and utilizes a G1/8 port.
This unit includes a SUS420J2 stainless steel rod (option A) for improved corrosion resistance and ships with a piston magnet (-S) for position sensing. The extruded aluminum barrel includes sensor grooves on both sides, accepting AirTAC CMSE reed and DMSE electronic switches. The rear adjuster acts purely as a travel stop and does not hold the load without live air pressure.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX600-10S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX600-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX600-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX600-10S Is Used
Commissioning Fine-Tuning
Dial in the exact 590 to 600 mm retract stop during machine setup without fabricating external physical stops.
Product Changeover
Quickly adjust the end-of-stroke position by a few millimeters to accommodate varying package sizes on a line.
Long-Travel Positioning
Use the 600 mm travel to move a small 402 N payload across a workstation, tweaking the final landing spot on the fly.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX600-10S the Right Cylinder?
Choose this 32 mm bore when an application requires 402 N of push force at 0.5 MPa, stepping down from a 40 mm bore that yields 628 N if space is tight. The 10 mm adjustable stroke is ideal for fine-tuning end positions on a 600 mm stroke without swapping cylinders or adding external stopper blocks. For true load-holding without continuous air pressure, select a SAIL or BSAI cylinder instead.
Because the 600 mm stroke is substantial for a 32 mm bore, the 12 mm rod and M10x1.25 thread still require external guidance to prevent side-loading damage. When replacing an ISO 15552 cylinder, match the 600 mm stroke, 10 mm adjustment, PT tapered port threads, and Basic, FA, LB, TC, FTC, TCM1, or TCM2 mounting set.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX600-10S FAQ
The rear adjuster screw allows you to shorten the effective stroke by up to 10 mm, creating a 590 to 600 mm usable travel window. It acts as a mechanical stop to fine-tune the retract position and is not a lock that holds the load without air pressure.
At 0.5 MPa, the 32 mm bore provides 402 N of push force and 345 N of pull force. The standard speed range for this bore size is 30-800 mm/s, operating with a G1/8 port.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX600-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.