Airtac Adjustable Cylinder SAIJ32 SAIJ32AX750-100
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX750-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 750mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke750 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX750-100
The AirTAC SAIJ32X750-100 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that creates a 650-750 mm usable travel window. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch placement.
This model uses an external stopper at the rear to trim the effective stroke by up to 100 mm without adding external stops. The adjuster acts as a travel end-stop for fine-tuning during commissioning; it does not lock the load without live air. It supports a subset of mounts (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits FB, CA, CB, and CR.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX750-100 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX750-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 750 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX750-100
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×750 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX750-100 Is Used
Variable End-Stop Tuning
Dial in the exact retraction point within the 650-750 mm window during machine setup to accommodate varying material thicknesses without swapping cylinders.
Product Changeover
Quickly adjust the stroke length on automated lines when switching product sizes, using the rear screw to set new end positions on the fly.
Commissioning Calibration
Fine-tune the final end-of-stroke position during initial machine commissioning to perfect timing without adding bulky external mechanical stops.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX750-100 the Right Cylinder?
Choose this 32 mm bore when you need precise end-position tuning during product changeovers rather than a fixed-stroke SAI cylinder. Because the 750 mm stroke is long, the 12 mm rod and M10x1.25 thread still require an external guide to prevent excessive side-loading and rod deflection.
For load-holding without continuous air pressure, note that the rear adjuster and air cushions only decelerate the travel end; they do not function as a brake. Consider an AirTAC SAIL or BSAI cylinder for true locking needs. To match this ISO 15552 replacement, verify the 32 mm bore, 750 mm stroke, 100 mm adjustment, PT G1/8 port, and mounting hardware.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX750-100 FAQ
At 0.7 MPa, the push force increases to 563 N.
The rear adjuster allows you to shorten the 750 mm nominal stroke by up to 100 mm, providing a usable travel window of 650 to 750 mm. It acts as a mechanical stop for end-position tuning and does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX750-100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.