Airtac Adjustable Cylinder SAIJ32 SAIJ32AX85-75
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX85-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 85mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke85 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX85-75
The AirTAC SAIJ32X85-75 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. This wide adjustment range is perfect for applications requiring highly variable end positions without swapping hardware.
Built with an SUS420J2 stainless steel rod (option A) for enhanced corrosion resistance, this 32 mm bore unit utilizes PT tapered ports and operates at speeds of 30-800 mm/s. The extruded aluminum barrel includes sensor grooves on both sides, and mounting is supported via a specific subset of accessories: Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX85-75 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX85-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 85 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX85-75
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×85 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX85-75 Is Used
Product Changeovers
Quickly adapt the retract end position for different product sizes on a packaging line without physically replacing the cylinder.
Machine Setup
Fine-tune the 10-85 mm travel window during initial commissioning to achieve exact positioning without adding external stopper blocks.
Variable End Stops
Dial in the precise stroke distance for delicate pressing or clamping operations where the required travel varies between batches.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX85-75 the Right Cylinder?
The SAIJ32X85-75 is selected over a fixed SAI cylinder when machine formats change frequently, as the rear screw acts as an external stop to set the retract end position precisely.
Because the stroke is under 300 mm, side-load stress on the 12 mm rod is manageable, though external guides are still recommended for heavy lateral loads. Note that the rear adjuster is a travel stop, not a lock; the cylinder will not hold its load without live air. For load-holding requirements, consider the SAIL or BSAI series. This configuration uses PT tapered ports and lacks a magnet, so position sensing requires external limits.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX85-75 FAQ
At 0.9 MPa, the push force increases to 724N.
The SAIJ32X85-75 has a nominal stroke of 85 mm with a 75 mm adjustment code. By turning the rear screw, you can shorten the effective stroke, creating a usable travel window ranging from 10 mm to 85 mm to suit your exact positioning needs.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX85-75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.