Airtac Adjustable Cylinder SAIJ32 SAIJ32AX850-10
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX850-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 850mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke850 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX850-10
The AirTAC SAIJ32X850-10 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. The PT tapered port thread and SUS420J2 stainless steel rod (code A) ensure robust corrosion resistance for demanding environments.
This adjustable-stroke model lets you fine-tune the retract end position at commissioning without adding external stops. The rear adjuster acts purely as a travel stop, not a lock, so live air is required to hold the load. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic switches.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX850-10 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX850-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 850 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX850-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×850 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX850-10 Is Used
Machine Setup Tuning
Dial in the exact 840 to 850mm retract position during machine commissioning without swapping physical hardware.
Product Changeover
Quickly adjust the end-stop by up to 10mm to accommodate slight length variations when changing product runs on a line.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX850-10 the Right Cylinder?
Stepping up to the 40mm bore increases push force to 628N, while dropping to a smaller bore reduces the footprint. Because the 850mm stroke is long and the 12mm rod is relatively slim, an external guide is recommended to prevent excessive side-load deflection.
An adjustable stroke is preferred over a fixed SAI cylinder when you need variable end-stops for product changeovers. For load-holding without continuous air pressure, this cylinder is insufficient; consider the SAIL air-released lock or BSAI clamp-lock instead. This SKU uses PT ports, omits the FB/CA/CB/CR mounting set, and lacks a magnet for sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX850-10 FAQ
The rear adjuster screw acts as a mechanical stop that shortens the effective stroke by up to 10mm, creating a usable travel window of 840 to 850mm. It is a travel stop, not a lock, so it cannot hold the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX850-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.