Airtac Adjustable Cylinder SAIJ32 SAIJ32BX100-10
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32BX100-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 100mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke100 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX100-10
The AirTAC SAIJ32X100-10 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 90-100 mm usable travel window, allowing you to dial back the 100 mm nominal stroke by up to 10 mm during commissioning without adding external stops.
This variant features a SUS304 stainless steel rod for superior corrosion resistance and uses PT tapered port threads (G1/8). The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE solid-state switches. The rear adjuster acts purely as a travel stop to set the end position, meaning it does not hold the load without live air pressure.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX100-10 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX100-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX100-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX100-10 Is Used
Machine Setup Tuning
Fine-tune the 90-100 mm travel window during initial commissioning to perfectly dial in the end position without swapping cylinders or adding external shims.
Product Size Changeover
Quickly adjust the retract stop on a packaging line when switching between slightly different product sizes that require minor travel variations.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX100-10 the Right Cylinder?
If you need less force, step down to a 25 mm bore, or step up to a 40 mm bore for 628 N if your load demands it. The adjustable stroke is ideal for product changeovers where a fixed-stroke SAI cylinder would require shimming or swapping.
Because the 100 mm stroke is relatively short, side-loading is less of a concern, but always guide the load for optimal seal life. For load-holding without live air, this cylinder is not a lock; consider the SAIL or BSAI series instead. It is dimensionally interchangeable per ISO 15552 and supports the Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounting set.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX100-10 FAQ
The rear adjuster screw lets you shorten the effective travel from the 100 mm nominal stroke by up to 10 mm, creating a 90-100 mm usable window. It acts as a mechanical stop to set the end position and does not lock the load without live air pressure.
At the maximum 1.0 MPa pressure, it delivers up to 82 kgf.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX100-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.