Airtac Adjustable Cylinder SAIJ32 SAIJ32BX100-10S
The AirTAC Airtac Adjustable Cylinder SAIJ32 SAIJ32BX100-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 100mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke100 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX100-10S
The AirTAC SAIJ32X100-10-S is a double-acting, single-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 100 mm nominal stroke that can be fine-tuned down by up to 10 mm, giving you a precise 90-100 mm usable travel window during commissioning. In the compact 32 mm bore class, it delivers 402 N of push force and 345 N of pull force at 0.5 MPa.
This specific configuration features a SUS304 stainless steel rod for superior corrosion resistance and includes a magnet for CMSE reed and DMSE electronic sensors. The extruded aluminum barrel integrates sensor grooves on both sides, and fluid is supplied via PT tapered ports.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX100-10S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX100-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX100-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX100-10S Is Used
End-Stop Calibration
Dial in the exact 90-100 mm travel window during machine setup to perfect part seating without swapping physical spacers.
Product Changeover
Quickly adjust the retract end position on a packaging line when handling different product sizes on the fly.
Sensor Positioning
Leverage the dual-side sensor grooves and built-in magnet to confirm exact stroke endpoints after micro-adjustments.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX100-10S the Right Cylinder?
Choose this 32 mm bore adjustable cylinder when you need exact end-position tuning without adding external stops. If your application requires less force, stepping down is not an option below 32 mm in this series, but if you need more thrust, the 40 mm bore provides 628 N push force at 0.5 MPa. The rear adjuster acts purely as a travel stop and does not hold the load without live air; for dead-end load holding, consider an AirTAC SAIL or BSAI series.
To match this ISO 15552 interchangeable cylinder exactly, confirm the 100 mm stroke, 10 mm adjustment range, PT port thread, and the -S magnet option. The 12 mm rod and M10x1.25 thread handle moderate side loads well, though any long-stroke setup still requires an external guide. SAIJ supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX100-10S FAQ
At 0.5 MPa operating pressure, this 32 mm bore cylinder provides 402 N of push force and 345 N of pull force. It can reach a maximum push force of 724 N at 0.9 MPa.
The rear adjuster screw allows you to shorten the effective stroke by up to 10 mm, creating a 90-100 mm travel window. It functions as a mechanical stop for end-position tuning and is not a locking device.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX100-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.