Airtac Adjustable Cylinder SAIJ32 SAIJ32BX1000-10
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32BX1000-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 1000mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke1000 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX1000-10
The AirTAC SAIJ32X1000-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 990-1000 mm usable travel window, allowing you to dial back the nominal 1000 mm stroke by up to 10 mm during commissioning.
This variant uses a SUS304 stainless steel rod for corrosion resistance and features a PT tapered port thread. The extruded aluminum barrel includes sensor grooves on both sides, though this unit ships without a magnet. The rear adjuster acts purely as a travel stop to fine-tune end positions without adding external stops.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX1000-10 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX1000-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 1000 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX1000-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×1000 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX1000-10 Is Used
Long-Stroke Positioning
Fine-tunes the retract end-stop on a 1000 mm travel axis, ensuring precise placement without machining external stop blocks.
Machine Changeover
Quickly adjusts the 10 mm travel window during product size transitions on automated lines, saving setup time.
Corrosive Environments
Leverages the SUS304 stainless steel rod to handle extended reach tasks in washdown or mildly corrosive industrial settings.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX1000-10 the Right Cylinder?
Because the stroke is 1000 mm, the 12 mm rod diameter requires an external guide to prevent excessive side-load damage to the seal package.
The adjustable screw lets you set exact retract positions during product changeovers without swapping the cylinder. Note that the rear adjuster is a stop, not a lock; the cylinder will not hold its load without live air pressure. For load-holding requirements, consider the SAIL or BSAI series. This SAIJ model supports the Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounting interface set.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX1000-10 FAQ
The maximum force at 1.0 MPa is 82 kgf.
The rear adjuster allows you to shorten the effective travel from 1000 mm down to 990 mm. This creates a 990-1000 mm usable window for fine-tuning the end position at commissioning without changing the cylinder itself.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX1000-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.