Airtac Adjustable Cylinder SAIJ32 SAIJ32BX1000-100
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32BX1000-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 1000mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke1000 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX1000-100
The AirTAC SAIJ32X1000-100 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the end position without adding external stops. It provides a usable travel window of 900-1000 mm, letting you dial in the exact retract distance during commissioning.
Because the 1000 mm stroke exceeds the standard maximum for this bore size, this SKU is a non-standard, made-to-order unit. The extruded aluminum barrel includes sensor grooves on both sides for CMSE reed or DMSE electronic solid-state switches, though this specific configuration ships without a magnet. The rear adjuster acts purely as a travel stop to set deceleration, not as a lock to hold the load without live air pressure.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX1000-100 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX1000-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 1000 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX1000-100
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×1000 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX1000-100 Is Used
Machine Changeover
Dial in the exact retract distance from 900 to 1000 mm during product-size changeovers on a packaging line without swapping out the entire cylinder assembly.
Variable End-Stop Tuning
Achieve precise end-position tuning at commissioning by using the rear stopper to trim the stroke, eliminating the need to bolt on external physical stops.
Long-Travel Conveying
Handle long-stroke material push-off tasks where the 100 mm adjustment window allows operators to compensate for varying package lengths on the fly.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX1000-100 the Right Cylinder?
Choose this adjustable model when your machine setup requires precise variable end-stops or frequent product-size changeovers, unlike a fixed-stroke SAI cylinder. To replace this cylinder with an ISO 15552 interchangeable unit, match the 32 mm bore, 1000 mm stroke, 100 mm adjustment range, PT port thread, and the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting FB, CA, CB, and CR brackets.
For a 1000 mm stroke, the 12 mm rod is highly susceptible to side loads and deflection. An external guide is strongly recommended to prevent rod bending and premature seal wear. Remember that the rear adjuster only trims the travel window; for true load-holding without live air pressure, you must specify an external rod lock, a pilot-operated check valve, or switch to an AirTAC SAIL or BSAI cylinder.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX1000-100 FAQ
If you increase the pressure to 0.7 MPa, the push force rises to 563N.
The rear adjuster acts as an external stop that lets you shorten the effective travel from the nominal 1000 mm down to 900 mm. It sets the travel end and deceleration point but does not lock or hold the load without continuous live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX1000-100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.