Airtac Adjustable Cylinder SAIJ32 SAIJ32BX1000-100S
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32BX1000-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 1000mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke1000 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX1000-100S
The AirTAC SAIJ32X1000-100-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, providing a usable travel window of 900 to 1000 mm. This configuration includes a SUS304 stainless steel rod for superior corrosion resistance and a built-in magnet for CMSE and DMSE sensors.
Because the nominal 1000 mm stroke approaches the maximum standard limit for this bore, the 100 mm adjustment screw is invaluable for fine-tuning the retract end position without adding external stops. The rear adjuster acts strictly as a travel stop and works alongside the standard variable air cushions to control deceleration, but it does not hold the load without live air pressure.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX1000-100S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX1000-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 1000 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX1000-100S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×1000 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX1000-100S Is Used
Product Changeover
Dial in the exact 900 to 1000 mm travel distance during line changeovers without physically replacing the cylinder or adding external mechanical stops.
Long-Stroke Positioning
Move lighter loads up to 402 N across a 1-meter span while using the rear screw to precisely set the final end-position for delicate assembly tasks.
Machine Commissioning
Fine-tune the retract end-stop on-site during initial machine setup to compensate for mechanical tolerances over the long 1000 mm stroke.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX1000-100S the Right Cylinder?
If your application requires less force, a smaller bore is appropriate; if you need significantly more thrust, stepping up to a 40 mm bore provides 628 N. The adjustable stroke is ideal for machine setups requiring product changeovers, allowing you to dial in the exact 900 to 1000 mm travel distance during commissioning rather than swapping out a fixed-stroke SAI cylinder.
For an exact ISO 15552 replacement, match the 32 mm bore, 1000 mm stroke, 100 mm adjustment, PT tapered port thread, and the -S magnet option. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2. Because the stroke is 1000 mm, the 12 mm rod and M10x1.25 thread will experience leverage forces on unsupported loads; always use an external guide to prevent side-loading damage. Note that for load-holding without live air, you must use a SAIL or BSAI cylinder instead of relying on this adjuster.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX1000-100S FAQ
At a maximum 1.0 MPa, the push force reaches 801 N.
The rear adjuster screw allows you to shorten the effective travel within a 900 to 1000 mm window. It functions as a mechanical stop for end-position tuning and does not lock or hold the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX1000-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.