Airtac Adjustable Cylinder SAIJ32 SAIJ32BX1000-10S
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32BX1000-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 1000mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke1000 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX1000-10S
The AirTAC SAIJ32X1000-10-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It features a 1000 mm stroke that can be fine-tuned down by up to 10 mm, creating a precise 990-1000 mm usable travel window during commissioning. As a 1000 mm stroke reaches the maximum standard limit for this 32 mm bore, it is supplied as a made-to-order non-standard unit.
Because the barrel is an extruded aluminum profile rather than a tie-rod design, it integrates sensor grooves on both sides for direct mounting of CMSE reed or DMSE electronic switches. The rear adjuster acts purely as a mechanical stop to dial in the end position without adding external stops, while the shared air cushions handle deceleration. Neither the adjuster nor the cushion will hold a load without live air pressure.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX1000-10S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX1000-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 1000 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX1000-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×1000 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX1000-10S Is Used
Long-Stroke Positioning
Dial in exact end-of-travel limits within the 990-1000 mm window for long-reach pick-and-place operations without installing external hard stops.
Product Changeovers
Quickly adjust the 10 mm stroke trim on packaging lines when handling slightly different product lengths, reducing machine setup downtime.
Extended Transfer Pushing
Utilize the 1000 mm reach to push materials across wide conveyor gaps, relying on the SUS304 rod for durability in varied environments.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX1000-10S the Right Cylinder?
The adjustable stroke is ideal for machine setups requiring variable end-stops or product changeovers, saving the effort of swapping a fixed-stroke SAI cylinder. For an exact ISO 15552 replacement, match the 32 mm bore, 1000 mm stroke, 10 mm adjustment, PT port, and -S magnet.
With a 1000 mm stroke on a 12 mm rod, the unsupported piston is highly susceptible to side-loading forces; an external guide rail must be used to prevent rod binding and premature seal wear. Also, remember that the rear adjuster is a travel stop, not a locking device. If the application requires true load-holding without continuous air pressure, integrate an external pilot-operated check valve or select an AirTAC SAIL or BSAI cylinder.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX1000-10S FAQ
If operated at 0.7 MPa, the push force increases to 563 N.
The rear adjusting screw acts as a mechanical stopper that lets you shorten the effective 1000 mm stroke by up to 10 mm, providing a usable travel window of 990-1000 mm. It is a stop, not a lock, and does not hold the load without live air.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX1000-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.