Airtac Adjustable Cylinder SAIJ32 SAIJ32BX1000-30
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32BX1000-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 1000mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke1000 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX1000-30
The AirTAC SAIJ32X1000-30 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that creates a 970 to 1000 mm usable travel window.
The rear adjustment screw allows you to fine-tune the end position at commissioning without adding external stops. It uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and relies on variable air cushions at both ends to decelerate the load.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX1000-30 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX1000-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 1000 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX1000-30
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×1000 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX1000-30 Is Used
Long-Travel Positioning
Dial in exact end-stops on extended 1000 mm strokes where mechanical variance would otherwise require shimming or custom spacers.
Machine Changeover
Quickly trim up to 30 mm of stroke during product size changes on automated lines without swapping out the entire actuator.
Corrosive Environments
Leverage the SUS304 stainless steel rod for reliable actuation in washdown or corrosive manufacturing areas.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX1000-30 the Right Cylinder?
The adjustable stroke is ideal for dialing in exact end-stops during product changeover, unlike a fixed-stroke SAI cylinder. Because this is a 1000 mm stroke, long unsupported travel demands an external guide to prevent rod side-loading and premature wear.
The rear adjuster acts only as a travel stop and does not hold the load without live air. For fail-safe load holding without pressure, select a SAIL (air-released lock) or BSAI (clamp-lock) cylinder instead.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX1000-30 FAQ
A rear stopper screw lets you shorten the effective travel from the nominal 1000 mm down to 970 mm, providing a 30 mm tuning window for precise end-position calibration.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX1000-30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.