Airtac Adjustable Cylinder SAIJ32 SAIJ32BX125-10
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32BX125-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 125mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke125 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX125-10
The AirTAC SAIJ32X125-10 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a 115-125 mm usable travel window, allowing you to dial back the 125 mm nominal stroke by up to 10 mm during commissioning without adding external stops.
This variant uses a SUS304 stainless steel rod for superior corrosion resistance and features PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides, ready for CMSE reed or DMSE electronic switches if a magnet is added later. It supports the Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounting set.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX125-10 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX125-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 125 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX125-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×125 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX125-10 Is Used
Machine Commissioning
Dial in the exact 115-125mm end-of-stroke position during setup to perfect a new assembly process without swapping physical hardware.
Product Changeover
Quickly adjust the retract stop by up to 10mm on a packaging line when running a slightly shorter product variant.
End-Stop Trimming
Fine-tune the final resting position of a small pneumatic press to account for mechanical wear over time.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX125-10 the Right Cylinder?
Select this 32mm bore when you need precise end-position tuning on the fly, stepping down from a 40mm bore (which yields 628N at 0.5 MPa) to save space. The rear adjuster acts strictly as a travel stop to fine-tune deceleration, not as a lock; it cannot hold a load without live air. For position holding without pressure, consider an external pilot-operated check valve or the SAIL series.
To match this ISO 15552 interchangeable cylinder, specify a 32mm bore, 125mm stroke, 10mm adjustment, PT G1/8 port, and your required mounting. Note that the 12mm rod and M10x1.25 thread handle moderate side loads, but always guide the rod externally to prevent premature wear.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX125-10 FAQ
It features a rear adjuster screw that lets you shorten the effective travel from 125mm down to 115mm. This creates a 10mm tuning window to set the exact retract position without using external stops.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX125-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.