Airtac Adjustable Cylinder SAIJ32 SAIJ32BX125-30S
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32BX125-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 125mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke125 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX125-30S
The AirTAC SAIJ32X125-30-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 95 to 125 mm usable travel window, allowing you to dial back the 125 mm nominal stroke by up to 30 mm during commissioning.
This adjustable model omits the FB, CA, CB, and CR mounts, offering a focused set of interfaces: Basic, FA, LB, TC, FTC, TCM1, and TCM2. The included -S magnet enables precise tracking via CMSE reed or DMSE electronic sensors fitted into the dual-side barrel grooves. The PT tapered port ensures a tight, sealed pneumatic connection.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX125-30S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX125-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 125 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX125-30S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×125 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX125-30S Is Used
Product Changeover
Quickly adjust the end-stop from 95 to 125 mm to accommodate varying package sizes on a packaging line without swapping hardware.
Machine Setup
Fine-tune the retract position during initial commissioning to align sensors and tooling perfectly, eliminating mechanical guesswork.
Variable End Stops
Set precise travel limits for light-duty pressing or positioning tasks where hitting a specific 95-125 mm window is critical.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX125-30S the Right Cylinder?
If your process requires less force, stepping down is not an option in this series, but if you need higher force, the 40 mm bore provides 628 N. The rear adjuster acts purely as a mechanical stop for deceleration and positioning; it does not hold the load without live air pressure. For true fail-safe load holding, consider the SAIL or BSAI series instead.
This dimensionally interchangeable ISO 15552 cylinder uses a PT port and features a 12 mm rod with an M10x1.25 thread. Because the stroke is 125 mm, side-load risks are minimal, but always ensure the rod thread properly handles any lateral forces. It provides a direct replacement for standard ISO 15552 cylinders while adding crucial adjustability.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX125-30S FAQ
The rear adjuster screw lets you shorten the effective travel from the 125 mm nominal stroke down to 95 mm, providing a 30 mm tuning window. It acts as a physical stop to set the end position and does not lock the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX125-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.