Airtac Adjustable Cylinder SAIJ32 SAIJ32BX130-20S
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32BX130-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 130mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke130 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX130-20S
The AirTAC SAIJ32X130-20-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 110-130 mm usable travel window, allowing you to trim the 130 mm nominal stroke by up to 20 mm during commissioning.
This variant features a SUS304 stainless steel rod for corrosion resistance and includes a magnet for CMSE or DMSE sensors. The extruded aluminum barrel includes sensor grooves on both sides, and the PT tapered port threads match the standard G1/8 fitting size for this 32 mm bore.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX130-20S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX130-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX130-20S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX130-20S Is Used
Machine Setup Tuning
Fine-tune the 110-130 mm travel window during initial commissioning to dial in exact contact points without machining new hard stops.
Product Changeover
Quickly adjust the retract end-position by up to 20 mm on packaging lines when switching between slightly different product sizes.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX130-20S the Right Cylinder?
Select this 32 mm bore cylinder when an application requires exact end-position tuning without adding external stops. The rear adjuster acts purely as a travel stop and does not hold the load without live air; for true load-holding, consider an external rod lock or the SAIL series. To replace an ISO 15552 cylinder, match the 130 mm stroke, 20 mm adjustment, PT port, and -S magnet.
Because the 130 mm stroke is relatively short, side-loading is less severe than on longer strokes, but the 12 mm rod still requires external guidance for heavy lateral loads. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, omitting FB, CA, CB, and CR.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX130-20S FAQ
The rear adjuster screw lets you shorten the effective stroke by up to 20 mm, providing a usable travel window of 110-130 mm. It functions as a mechanical stop to set the end position and does not lock the load without continuous air pressure.
It operates at speeds between 30 and 800 mm/s.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX130-20S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.