Airtac Adjustable Cylinder SAIJ32 SAIJ32BX135-10S
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32BX135-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 135mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke135 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX135-10S
The AirTAC SAIJ32X135-10-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, providing a usable travel window of 125 to 135 mm. The extruded aluminum barrel includes sensor grooves on both sides, accommodating AirTAC CMSE reed and DMSE electronic switches without extra brackets.
This adjustable-stroke model allows precise end-position tuning at commissioning without swapping the cylinder or adding external stops. The rear screw acts strictly as a travel stop to set the retract position, not a load-holding lock. Fluid must be filtered to 40 um, and the PT tapered port threads match standard 32 mm bore G1/8 connections.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX135-10S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX135-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 135 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX135-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×135 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX135-10S Is Used
Machine Setup Fine-Tuning
Dial in the exact 125 to 135 mm end-position during commissioning to perfect component seating without machining new hard stops.
Product Size Changeover
Quickly adjust the retract distance on packaging lines when running different product lengths, saving changeover time.
Variable End-Stop Assembly
Use the 10 mm trim window to precisely control the pressing depth of lightweight 32 mm bore assembly operations.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX135-10S the Right Cylinder?
If your setup demands less force, stepping down is not an option in this series, but stepping up to a 40 mm bore yields 628 N. The 10 mm adjustment range is ideal for fine-tuning machine setup or product changeover, whereas a fixed SAI cylinder locks you into a single 135 mm dimension. For load-holding without live air pressure, consider an external rod lock or the AirTAC SAIL lock cylinder, as the SAIJ adjuster cannot hold a load.
Because the 135 mm stroke exceeds 100 mm, ensure adequate guidance for the 12 mm diameter rod to prevent excessive side-loading. This SAIJ32X135-10-S is dimensionally interchangeable per ISO 15552 and supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, omitting FB, CA, CB, and CR options.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX135-10S FAQ
At the maximum 1.0 MPa pressure, it delivers up to 82 kgf.
The rear adjuster screw allows you to shorten the effective stroke by up to 10 mm, creating a 125 to 135 mm usable travel window. It functions as a mechanical stop to set the end position and is not a lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX135-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.